SUBASSEMBLY:
Note: If doors have electric door switches, they must be reattached to original plug assembly. Switch assembly must then be
View of Expedition door panel | Remove plastic trim piece. Metal | Remove window/lock switch |
| clips hold on trim | assembly from door |
Remove hex head screws holding | Remove trim piece covering torx | Remove plastic door panel |
lower section of door panel | screws under door panel armrest |
|
| and remove screws |
|
Remove window switch and | Recommended location to | Remove speaker from door panel. |
reconnect. Wire tie switch in safe | relocate switch | Remove screws and unplug |
location. |
| connector |
| 3 |