Eec, Heat Pump 2 Cool / 3 Heat | Home Automation RC-2000 specs

This thermostat is equipped with Energy Efficient Control (EEC) that continually monitors the performance of the HVAC system and uses Stage 2 (heat or cool) and Stage 3 (auxiliary heat) only when necessary. If it determines that Stage 1 is able to heat or cool at a rate of 5 degrees per hour or better, Stage 2 will not be used. If Stage 1 is unable to heat or cool at this rate, the thermostat will use Stage 2 as needed. Under these conditions, Stage 1 will run continuously and Stage 2 will cycle on and off as needed. In extremely cold conditions, the auxiliary heating will be used when Stage 1 and/or Stage 2 is not heating at a sufficient rate.

EEC: This item turns on/off the Energy Efficient Control. On single state conventional HVAC systems, EEC enables the PID control algorithm.

Cool Anticipator: This adjusts the tendency of the HVAC to run the cooling system to refresh and dehumidify the air before the temperature rises to the desired cool settings. The recommended setting for most forced air cooling systems is 4. A higher number will decrease the tendency to run the cooling system below the cooling setting. A higher setting of 5 or 6 may be desired in dry climates.

2nd Stage Differential: This determines how far from the setpoint the temperature has to be before the second stage turns on.

Auxiliary Heat Differential:	This determines how far from the setpoint the temperature has to be before the
auxiliary heat turns on. This is only available for heat pump systems.

	Conventional (1 Cool / 1 Heat)			Heat Pump (1 Cool / 2 Heat)
	Zone Control (1 Cool / 1 Heat)			Dual Fuel Heat Pump (1 Cool / 2 Heat)
	EEC	*On	On / Off	EEC	*On	On / Off
EEC	Cool Anticipator	*4	1 - 10	Aux Heat Differential	*2	1 - 10
EEC				Heat Pump (2 Cool / 3 Heat)
Settings	Conventional (2 Cool / 2 Heat)			Heat Pump (2 Cool / 3 Heat)
Settings				Dual Fuel Heat Pump (2 Cool / 3 Heat)
				Dual Fuel Heat Pump (2 Cool / 3 Heat)
				EEC	*On	On / Off
	EEC	*On	On / Off	2nd Stage Differential	*1	1 - 10
	2nd Stage Differential	*2	1 - 10	Aux Heat Differential	*2	1 - 10

Temperature Sensors

The Temperature Sensor settings are used to configure the internal temperature sensor and optional remote temperature sensors that are connected to the thermostat. Any temperature sensors that are set as the same type (i.e. indoor or outdoor) will display the average temperature reading among the sensors.

Internal Sensor: This will enable or disable the onboard temperature sensor for indoor use only. *Enabled

External Sensor 1: This will enable the external temperature sensor for indoor or outdoor use. All indoor and outdoor temperatures are averaged between all sensors of the same type. *Disabled

External Sensor 2: This will enable the expansion module temperature sensor for indoor or outdoor use. All indoor and outdoor temperatures are averaged between all sensors of the same type. *Disabled

External Sensor 3: This will enable the expansion module temperature sensor for indoor or outdoor use. All indoor and outdoor temperatures are averaged between all sensors of the same type. *Disabled

RC-2000 specifications

Home Automation RC-2000: A Smart Revolution in Home Management

The Home Automation RC-2000 is an innovative solution designed to bring convenience, security, and efficiency to modern living. This advanced system enables homeowners to seamlessly control a variety of devices within their homes, providing a comprehensive ecosystem that enhances everyday life.

One of the standout features of the RC-2000 is its compatibility with a wide range of smart devices. From lighting and temperature control to security systems and entertainment equipment, the RC-2000 integrates effortlessly with countless devices, allowing users to manage their entire home through a single interface. This compatibility is made possible through its support for multiple communication protocols such as Wi-Fi, Zigbee, Z-Wave, and Bluetooth.

The RC-2000 also excels with its user-friendly mobile app. This intuitive application enables users to monitor and control their home from virtually anywhere, whether inside or outside the house. Customization options within the app allow homeowners to create schedules, set scenes, and automate tasks, making it easy to tailor the system to their unique needs.

Another notable characteristic of the RC-2000 is its advanced security features. Users can set up real-time monitoring and receive alerts for unusual activities in and around their homes. This capability is complemented by integration with smart cameras and locks, ensuring that users can remotely manage their home security with confidence.

The system’s voice control functionality further enhances user experience, as it can be easily integrated with popular virtual assistants like Amazon Alexa, Google Assistant, and Apple HomeKit. This hands-free control allows for seamless interaction with the system, enabling users to adjust settings or command devices through simple voice commands.

Energy efficiency is also a key focus of the RC-2000, as it not only promotes convenience but also aids in reducing energy consumption. Smart thermostats, for instance, can learn user patterns and adjust heating and cooling accordingly, leading to significant savings on energy bills.

With its combination of advanced technologies, comprehensive features, and user-friendly interface, the Home Automation RC-2000 stands at the forefront of smart home solutions. It is designed to provide homeowners with peace of mind, ultimate control, and the enhanced convenience that comes from a truly connected environment. The RC-2000 is not just a gadget; it is a gateway to a smarter, more efficient home.

EEC

Heat Pump (2 Cool / 3 Heat)

Temperature Sensors

RC-2000 specifications