Lightolier IS:4091216 instruction sheet Instruction Sheet for 9,12&16 Pendalyte Powerhead

Page 1

INSTRUCTION SHEET FOR 9”,12”&16” PENDALYTE™ POWERHEAD

Note: This instruction sheet covers several luminaire styles. Powerhead assembly, lamp type, and reflector style may vary slightly from that shown, although installation is the same.

To wire POWERHEAD to suspension kit (Standard, Stem, and Deco suspension kits sold separately) follow instructions enclosed with individual suspension kit and connect as follows: Using wire nuts (local hardware item) connect black lead to hot (black) power lead, connect white lead to neutral (white) power lead, connect green/bare leads to ground (green) lead. METAL HALIDE FIXTURES: refer to wiring diagram in fig. 1.

CAUTION: MAXIMUM WATTAGE AS MARKED ON LUMINAIRE MUST NOT BE EXCEEDED.

CONNECT TO APPROPRATE VOLTAGE

 

 

 

 

 

 

277V

 

 

 

 

 

 

 

 

 

 

 

 

BLACK

 

240V

 

 

208V

 

 

 

 

 

 

120V

 

 

 

POWERCORD

COMMONWHITE

GROUNDGROUND

HID BALLAST

Fig. 1

9”ALUMINUM REFLECTOR INSTALLATION

1.Locate 8-32 SCREWS, (supplied with POWERHEAD).

2.Align holes in ALUMINUM REFLECTOR with threaded holes in SPACER COLLAR. (Fig. 2)

3.Install 8-32 SCREWS and tighten evenly.

POWERHEAD

SPACER COLLAR

9” GLASS SHADE INSTALLATION

CAUTION: Wear safety glasses. Glass is fragile. Handle with care. Broken glass may pose a personal safety hazard.

NOTE: Natural oils and soil may discolor and stain glass finish. Wearing clean cotton gloves is recommended.

1.Locate RETAINER CUP, GASKET STRIPS and 8-32 SCREWS, (supplied with POWERHEAD). Thoroughly clean aluminum retainer cup to insure good adhesion of GASKET STRIPS. Peel off ADHESIVE BACKING and apply GASKET STRIPS to retainer, equally spaced, as shown. (Fig. 3)

2.Support glass shade in place, align evenly with extruded collar, and align RETAINER CUP with THREADED INSERTS in socket plate.

3.Install 8-32 SCREWS and tighten evenly to compress gasket strips.

12”&16” REFLECTOR/REFRACTOR INSTALLATION

ALUMINUM REFLECTOR

8-32

SCREWS

Fig. 2

POWERHEAD

THREADED

INSERT

GLASS

SHADE

1.Slide COLLAR up extruded NECK.

2.Peel off backing of FOAM GASKET and adhere to TABS on SOCKET MOUNT PLATE. (Fig. 4)

3.Tip Reflector/Refractor over SOCKET MOUNT PLATE and allow Reflector/Refractor to rest on

FOAM GASKET.

4. To secure Reflector/Refractor align SLOT in

POWERHEAD

COLLAR over PINS and slide COLLAR down

 

NECK. Twist COLLAR counter-clockwise allowing

 

PIN to rest in NOTCH.

 

ADHESIVE

BACKING

RETAINER CUP

GASKET

 

STRIPS

 

8-32

 

SCREWS

Fig. 3

12” REFRACTOR SUPPORT

CAUTION: 12” HID units with Acrylic Refractor must have REFRACTOR SUPPORT PLATE installed.

REFRACTOR SUPPORT PLATE and SUPPORT PLATE SCREWS ARE supplied with all 12” HID units.

1.Install Acrylic Refractor per instructions above.

2.Align REFRACTOR SUPPORT PLATE over SOCKET MOUNT PLATE. (Fig. 4)

3.Secure REFRACTOR SUPPORT PLATE with

SUPPORT PLATE SCREWS.

NOTCH

SLOT

COLLAR

PIN

SOCKET

MOUNT

PLATE

REFRACTOR

SUPPORT

PLATE

NECK

FOAM

GASKET

TAB

SUPPORT PLATE SCREWS

Fig. 4

Image 1
Contents 9ALUMINUM Reflector Installation Instruction Sheet for 9,12&16 Pendalyte PowerheadGlass Shade Installation 12&16 REFLECTOR/REFRACTOR Installation

IS:4091216 specifications

Lightolier IS:4091216 is a cutting-edge lighting solution designed to meet the diverse needs of modern spaces. This product embodies efficiency, functionality, and aesthetic appeal, making it an ideal choice for both residential and commercial applications.

One of the standout features of the IS:4091216 is its advanced LED technology. Utilizing energy-efficient LED lamps, this fixture not only reduces energy consumption dramatically compared to traditional incandescent options, but it also boasts a longer lifespan, thus minimizing maintenance and replacement costs. The integration of LEDs ensures that the light output remains consistent, without the flickering or dimming often associated with older lighting technologies.

The design of the Lightolier IS:4091216 is sleek and modern, allowing it to blend seamlessly into a variety of architectural styles. Its adjustable features make it highly versatile, catering to different lighting needs across various environments. Whether it’s for accent lighting, task lighting, or general illumination, this fixture can adapt accordingly. Additionally, the adjustable beam angles enable users to direct light exactly where it is needed, enhancing functionality without compromising on style.

Another notable characteristic of the IS:4091216 is its compatibility with smart home systems. By incorporating cutting-edge smart technology, this lighting fixture can be easily integrated into existing smart setups, allowing for remote control and automation. Users can adjust brightness, color temperature, and operational schedules through a simple app or voice commands via smart assistants. This level of convenience can lead to enhanced comfort and energy savings in the long run.

Durability is also a key aspect of the Lightolier IS:4091216. Built with high-quality materials, this fixture is designed to withstand the rigors of everyday use, making it suitable for both indoor and outdoor applications. Its weather-resistant properties and robust construction ensure longevity and reliability, even in challenging environmental conditions.

In summary, the Lightolier IS:4091216 merges advanced LED technology with a contemporary design, making it a standout choice in the lighting market. Its smart capabilities, adjustable features, and durable construction cater to the evolving needs of users seeking efficient, stylish, and reliable lighting solutions. Whether enhancing a cozy home atmosphere or illuminating a professional workspace, the IS:4091216 proves to be an exceptional addition to any setting.