IS26060, Let Box | Lightolier IS:26060 instruction

READ AND UNDERSTAND ALL TRACK, CONNECTOR, FEED-IN-KITS, AND ACCESSORY

INSTRUCTION SHEETS BEFORE INSTALLING ANY PROSPEC® TRACK ITEM.

This fixture is intended for installation in accordance with the National Electrical Code and local or Federal code specifications. To assure full compliance with codes and regulations, check with your local electrical inspector before installation. To prevent electrical shock, turn off electricity at fuse box before proceeding.

Retain these instructions for maintenance reference.

INSTRUCTION SHEET NO.

IS:26060

0597	Page 1 of 2

END FEED AND FLOATING CANOPY MOUNTING KIT - FLUSH AND STANDOFF VERSIONS

FOR USE WITH PROSPEC® SURFACE MOUNT TRACK SYSTEMS ONLY

CAUTION: TURN OFF POWER AT FUSE BOX BEFORE INSTALLING THE CANOPY KIT

END FEED MOUNTING INSTRUCTIONS

(Flush 26060WH, BK and Standoff 26061WH, BK)

Mounting the CANOPY at the end of FEED TRACK or directly above a FEED CONNECTOR.

1.Mark CENTER LINE for TRACK through CENTER LINE of OUT-

LET BOX.

2.NOTE: The CANOPY mounts to a 3 or 4” OCTAGON OUTLET BOX. The MOUNTING HOLES of the OUTLET BOX should be at 45° to the longitudinal axis of the TRACK. (Fig. 1)

3.Remove the KNOCK OUT PLATE from the FEED TRACK or CONNECTOR (retain the SCREW). (Fig. 2)

4.Prepare TAB on the PLATE ASSEMBLY as follows:

•FEED TRACK: DO NOT BREAK ANY TAB. (Fig. 2)

•POWER EXTENSION, IN-LINE, “T”, AND “X” CONNECTORS: BREAK THE 90° TAB OFF THE PLATE ASSEMBLY. (Fig. 3)

•“L” CONNECTOR: BREAK THE 90° TAB AND THE STRAIGHT TAB FROM THE PLATE ASSEMBLY. (Fig. 4)

5.Attach the PLATE ASSEMBLY onto the FEED TRACK or CONNECTOR using the SCREW. (Fig. 2 & 3)

6.Mount the TRACK to the ceiling (see instruction sheet IS:26000 provided with the TRACK) passing the wires through the center of the PLATE ASSEMBLY.

7.Rotate the PLATE ASSEMBLY until the SLOTS are in-line with the MOUNTING HOLES on the J-BOX.

8.Secure the PLATE ASSEMBLY to the J-BOX using the THIN HEAD SCREWS. (Fig. 5)

9.Attach the GROUND WIRE on the CANOPY PLATE to the GROUND LEAD or GROUND TERMINAL in the J-BOX. (Fig. 5)

10.WHEN USING THE FLUSH CANOPY 26060WH/BK. Slide the CANOPY PLATE between the CONNECTOR and CROSS BAR on the PLATE ASSEMBLY. For added security of CANOPY PLATE: Drill a hole in CANOPY PLATE and secure to ceiling with a screw.

11.WHEN USING THE STANDOFF CANOPY 26061WH/BK Slide the CANOPY PLATE between the CROSS BAR and NUT on the PLATE ASSEMBLY. Rotate the NUT to secure the CANOPY PLATE against the ceiling. (Fig. 8)

NOTE: THE CROSS BAR MUST COVER THE SLOT IN

THE CANOPY PLATE AFTER ASSEMBLY.

12.Follow the instructions for wiring on the instruction sheet included with the “FEED TRACK” or “CONNECTOR”.

FIG. 5		CANOPY
	J-BOX	PLATE
	J-BOX
		GROUND
		WIRE
		THIN HEAD
		SCREW

		OUTLET BOX
		MOUNTING HOLE
		OUTLET BOX
TRACK UNIT	LONGITUDINAL
TRACK UNIT	TRACK
	TRACK
FIG. 1		PLATE
	SCREW	ASSEMBLY
	SCREW
KNOCK OUT
PLATE
		FEED TRACK
FIG. 2
		CROSS BAR
	SCREW	PLATE
	SCREW	ASSEMBLY
		ASSEMBLY
90°TAB
KNOCK OUT
PLATE
		POWER EXTENSION
		CONNECTOR
FIG. 3
	CROSS BAR
90°TAB		PLATE
KNOCK OUT		ASSEMBLY
KNOCK OUT		STRAIGHT
PLATE		STRAIGHT
PLATE		TAB
		TAB

“L” CONNECTOR

FIG. 4

LIGHTOLIER a GENLYTE company.

631 Airport Road, Fall River, MA 02720

IS:26060 specifications

The Lightolier IS:26060 is a powerful and versatile lighting fixture that has gained popularity in both commercial and residential applications. Designed with cutting-edge technology and user-friendly features, this fixture is ideal for a range of environments, from office spaces to retail locations and even in homes that prioritize modern aesthetics and functionality.

One of the primary features of the IS:26060 is its energy efficiency. It utilizes LED technology, which not only reduces energy consumption but also lowers overall operational costs. With a lifespan that can exceed 50,000 hours, LED lights require significantly less frequent replacement compared to traditional incandescent or fluorescent bulbs, contributing to a lower environmental impact.

The IS:26060 is designed with flexibility in mind. It offers a range of color temperature options, typically ranging from warm white to cool daylight, allowing users to choose the light quality that best suits their space and mood. This adjustability is particularly beneficial in commercial settings where different tasks or products may benefit from different lighting conditions.

Another notable characteristic of the Lightolier IS:26060 is its sleek and modern design. Its minimalist aesthetic blends seamlessly with various decor styles. The fixture can be mounted in different orientations, including surface-mounted or suspended, to cater to specific design needs and space limitations.

In addition to its design and efficiency, the fixture is equipped with advanced features such as dimming capabilities. Users can easily adjust the lighting intensity to create the perfect ambiance, whether for a bright workspace or a cozy gathering space. This adaptability enhances user experience and contributes to the overall functionality of the lighting solution.

The IS:26060 also incorporates sophisticated thermal management technology, which helps maintain optimal operating temperatures, thereby enhancing performance and longevity. This feature is particularly crucial for LED fixtures, as overheating can lead to reduced efficacy and lifespan.

In conclusion, the Lightolier IS:26060 exemplifies a harmonious blend of design, technology, and functionality. Its energy-efficient LED lighting, versatile color temperatures, sleek aesthetics, and advanced features make it a standout choice for any lighting project. Whether for commercial or residential use, this fixture meets the needs of modern illumination with style and efficiency.