Ramsey Electronics QAMP30 manual Introduction, HOW IT Works

Page 4

INTRODUCTION

The Ramsey QAMP series of QRP power amplifiers are compact 10 to 20 watt RF amplifiers for QRP CW transmitters. These amplifiers are made to be driven by transmitters in the ½ to 2 watt range. Built-in to the power amplifier is a sensitive T-R relay which will switch the unit in and out of the antenna line. When in receive, the amplifier is bypassed and the antenna feeds directly to the input jack, when you go to transmit, the T-R circuit detects the transmit RF power and automatically switches the power amplifier into the circuit and amplifies the applied RF power. If you decide to run "barefoot" turning off the QAMP will disable the amplifier and your QRP transmitter will feed directly through the amplifier without any amplification. Power is supplied by any 12 to 15 volt DC source with a current draw of 1 to 3 amps depending upon RF power output. A 5 pole low pass filter using toroid cores keeps harmonics and spurious signals very low. The entire amplifier is very easy to construct, but does require you to wind a few coils and RF transformers - we'll lead you step-by-step through all steps!

HOW IT WORKS

The QRP amplifier is very simple with most of the "magic" being done by just a few parts, the pair of MOSFET transistors and the ferrite wideband transformers. Transformer T2 matches the 50 ohm amplifier input to the push-pull inputs of the FET transistors. The term push-pull means that one transistor amplifies the positive portion of the input signal while the other transistor amplifier the negative portion - put another way, one is pushing while the other is pulling! The center tapped transformer splits the input signal so each transistor will only amplify the correct part of the input signal. Incidentally, this push-pull technique has been used for years in both vacuum tube and solid-state gear.

The push-pull signal output from the FETs is combined and impedance matched to 50 ohms by ferrite transformer T1. To reduce any harmonic content, a 5 pole low pass filter consisting of L1,2,3 and C4,5,6,7 is used.

The FET transistors are biased "on" slightly for best gain and linearity. Zener diode D1 provides a constant voltage for the bias network R2,3,4. Bias pot R4 allows adjustment of bias voltage to the FET transistor gates. It is adjusted for a set amount of current through the transistors.

The T-R relay circuit uses a simple diode detector consisting of D2 and D3. The detector output is amplified by transistors Q3 and Q4 to drive relay K1.

QAMP-30 • 4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents MTR 20 Watt QRP Linear Amplifier KIT Ramsey Transmitter Kits Meter QRP Introduction HOW IT WorksParts List for the QAMP30 QRP Power Amplifier Capacitors ResistorsSemiconductor Devices Other ComponentsTips and Notes Ramsey LEARN-AS-YOU-BUILD Assembly StrategyConstruction QAMP-30 QAMP-30 Transistor bend pix QAMP-30 Turns through each hole Each lead is about 1 long QAMP-30 Initial Tests Your Power Supply and RF Output Power Verifying Transmitter RF Output Maximizing RF Power Output Troubleshooting HintsUsing the QRP Power Amplifier Enclosure RecommendationsParts Layout QAMP30 Power Amplifier KIT QAMP-30 Ramsey Kit Warranty Estimated Assembly QAMP30 20 Watt Linear AmplifierRequired Tools Additional Suggested Items

QAMP30 specifications

Ramsey Electronics QAMP30 is a versatile audio amplifier designed for a range of audio applications. This compact yet powerful amplifier is specifically engineered to provide quality sound in a small footprint, making it ideal for home audio systems, portable audio setups, and compact installations.

One of the main features of the QAMP30 is its robust 30-watt per channel output, delivering clear and dynamic sound that can fill a room. Its solid state design ensures reliability and durability, making it suitable for both casual listeners and audiophiles. The amplifier supports continuous operation, allowing users to enjoy music for extended periods without worrying about overheating or performance degradation.

In terms of connectivity, the QAMP30 is equipped with multiple input options. It includes RCA inputs for easy connection to various audio sources, such as televisions, DVD players, and computers. This flexibility allows users to integrate the amplifier seamlessly into their existing audio setups. Additionally, the amplifier features a 3.5mm auxiliary input, further expanding its compatibility with portable devices like smartphones and tablets.

The QAMP30 also incorporates advanced circuit design technologies to enhance audio performance. Its low noise floor and high signal-to-noise ratio ensure that audio playback is clean and free from unwanted distortion. This feature is particularly important for critical listening environments where audio fidelity is paramount.

Moreover, the QAMP30 has an integrated volume control knob, giving users direct access to adjust their listening levels easily. The simple, user-friendly interface and compact design permit versatile placement in various setups, whether on a shelf, desk, or installed within a larger audio system.

Furthermore, the amplifier is equipped with built-in protection features, such as thermal overload and short-circuit protection, safeguarding the device and connected audio equipment from damage. The overall build quality of the QAMP30 reflects Ramsey Electronics' commitment to producing reliable and effective audio products.

In summary, Ramsey Electronics QAMP30 is a compact, powerful audio amplifier featuring 30 watts per channel output, multiple input options, advanced circuit technologies, and built-in protection features. Its user-friendly design and high-performance characteristics make it an excellent choice for anyone looking to enhance their audio experience.
Top Page Image Contents