Tips and Notes, Construction | Ramsey Electronics QAMP30 instruction

"THE RAMSEY LEARN-AS-YOU-BUILD ASSEMBLY STRATEGY"

Take a look at the parts layout diagram. There is quite a lot to the construction of the QAMP30. It's easier than it seems once you get going, especially after you have installed a few of the "landmark" components. Once these "landmark" components are placed, other parts’ positions are referenced to them, and construction goes quite smoothly. This will help in relating from one part to another what specific holes it may require on the board, and that part's orientation. In addition, we will discuss the purpose of most components or groups of components as we go along. This is the Ramsey Learn-As-You- Build kit assembly philosophy. Be sure to read through all the steps, and check the boxes as you go to be sure you didn't miss any important steps. Most of the problems we find here at the factory are due to faulty assembly, no matter how experienced the builder may be: it’s especially tough to tell a 30 year experienced ham that he goofed! Before you run the circuit, check all diodes and polarized capacitors for proper orientation.

TIPS AND NOTES:

Use a good soldering technique - let your soldering iron tip gently heat the traces to which you are soldering. Heat both wires and pads simultaneously. Apply the solder on the iron, lead, and the pad when pad and wire is hot enough to melt the solder. The actual joint should look like a drop of water on paper (somewhat soaked in).

Parts are mounted on the top side of the board. This is the side that has no traces or pads on it.

Part orientation - All parts in this kit are mounted at 90 degree angles, meaning parts are either parallel or perpendicular to the sides of the board.

Part installation - When parts are installed, the part is placed flat to the board, and the leads are bent on the backside of the board to prevent the part from falling out before soldering. The part is then soldered into place, and the spare leads are removed. Make sure lead lengths are as short as possible when dealing with the RF section of this kit.

CONSTRUCTION:

Since you may appreciate some "warm-up" soldering practice as well as a chance to put some "landmarks" on the PC board, we'll first install some "hardware" components.

In all the following instruction steps, our word "INSTALL" means to do the following:

•Insert the part, oriented correctly, into its correct holes in the PC board.

QAMP-30 • 6

QAMP30 specifications

Ramsey Electronics QAMP30 is a versatile audio amplifier designed for a range of audio applications. This compact yet powerful amplifier is specifically engineered to provide quality sound in a small footprint, making it ideal for home audio systems, portable audio setups, and compact installations.

One of the main features of the QAMP30 is its robust 30-watt per channel output, delivering clear and dynamic sound that can fill a room. Its solid state design ensures reliability and durability, making it suitable for both casual listeners and audiophiles. The amplifier supports continuous operation, allowing users to enjoy music for extended periods without worrying about overheating or performance degradation.

In terms of connectivity, the QAMP30 is equipped with multiple input options. It includes RCA inputs for easy connection to various audio sources, such as televisions, DVD players, and computers. This flexibility allows users to integrate the amplifier seamlessly into their existing audio setups. Additionally, the amplifier features a 3.5mm auxiliary input, further expanding its compatibility with portable devices like smartphones and tablets.

The QAMP30 also incorporates advanced circuit design technologies to enhance audio performance. Its low noise floor and high signal-to-noise ratio ensure that audio playback is clean and free from unwanted distortion. This feature is particularly important for critical listening environments where audio fidelity is paramount.

Moreover, the QAMP30 has an integrated volume control knob, giving users direct access to adjust their listening levels easily. The simple, user-friendly interface and compact design permit versatile placement in various setups, whether on a shelf, desk, or installed within a larger audio system.

Furthermore, the amplifier is equipped with built-in protection features, such as thermal overload and short-circuit protection, safeguarding the device and connected audio equipment from damage. The overall build quality of the QAMP30 reflects Ramsey Electronics' commitment to producing reliable and effective audio products.

In summary, Ramsey Electronics QAMP30 is a compact, powerful audio amplifier featuring 30 watts per channel output, multiple input options, advanced circuit technologies, and built-in protection features. Its user-friendly design and high-performance characteristics make it an excellent choice for anyone looking to enhance their audio experience.