B0500, Existing Installation | Lightolier FAEM3 guide

INSTRUCTION SHEET NO.

IS:FAEM3

B0500

Page 4 of 4

READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE

This fixture is intended for installation in accordance with the National Electrical Code and local regulations. To assure full compliance with local codes and regulations, check with your local electrical inspector before installation. To prevent electrical shock, turn off electricity at fuse box before proceeding.

Retain these instructions for maintenance reference.

E.CLOSE-IN (CONT.)

4.Pull down SWITCH/INDICATOR LIGHT BOX and clamp onto ceiling by tightening SCREWS on side of BOX (Fig. 4).

5.Connect INVERTER CONNECTORS in SWITCH/INDICATOR LIGHT BOX (Fig. 4).

6.Fasten TRIM PLATE to SWITCH/INDICATOR LIGHT BOX with LOCK NUT (Fig. 5).

F.ADJUST MOUNTING FRAME

1.Set MOUNTING FRAME so the bottom edge is flush with finished ceil- ing (Fig. 6).

TRIM PLATE

Fig. 5

LOCK NUT

Note: Final vertical adjustment can be made with MOUNTING BRACKET SCREWS (Fig. 7) on inside of MOUNTING FRAME.

G.OPERATION

When AC power is applied, the charging indicator light is illuminated indi- cating that the battery is being charged. When the power fails, the emer- gency lighting ballast automatically switches to emergency operation, keeping one lamp illuminated at reduced output for 90 minutes.

H.MAINTENANCE

Although no routine maintenance is required to keep emergency lighting ballast functional, it should be checked periodically to ensure that it is working. The following schedule is recommended:

1.Visually inspect the charging indicator light monthly. It should be illuminated.

2.Test the emergency operation of fixture once every 3 months. One lamp should operate at reduced output.

3.Conduct a 90 minute discharge test once a year. One lamp should operate at reduced output for 90 minutes.

I.EMERGENCY BALLAST REPLACEMENT

1.Make sure AC power is off at fuse box.

2.Remove REFLECTOR (see reflector trim instruction sheet).

3.Remove TRIM PLATE by removing LOCKNUT (see Fig. 5); disconnect INVERTER CONNECTORS, loosen SCREW on side of SWITCH BOX and slip SWITCH BOX onto the ceiling.

4.Loosen SCREW away from EMERGENCY BALLAST ASSEMBLY (Fig. 8).

5.Pull EMERGENCY BALLAST off MOUNTING BRACKET and down through the frame opening (Fig. 9).

6.Unscrew and disassemble defective EMERGENCY BALLAST from SWITCH BOX and JUNCTION BOX.

7.Replace with new EMERGENCY BALLAST. Follow wiring diagram and instruction procedure as stated in this Instruction Sheet.

EXISTING INSTALLATION

NOTE: Emergency ballast kit may be installed after the frame-in kits and ceilings are finished. If ceiling is accessible from above, it may be easier to install the emergency ballast from above.

•EMERGENCY BALLAST INSTALLATION FROM ABOVE: Follow installation instructions in Step A, B, D and E.

•EMERGENCY BALLAST INSTALLATION FROM BELOW:

1.Make sure AC power power is off at fuse box.

2.Remove REFLECTOR (see reflector trim instruction sheet).

3.Install EMERGENCY BALLAST to the center of MOUNTING FRAME BRACKET as shown in Fig. 1 and 9.

4.Go to step A, B, D and E.

Fig. 6

MOUNTING BAR,

Fig. 7 OR CHANNELS,

EMT

MOUNTING

BRACKET

EMERGENCY

BALLAST

Fig. 8

MOUNTING

BRACKET

Fig. 9

MOUNTING

FRAME

MOUNTING

FRAME

MOUNTING

FRAME

SCREW

MOUNTING

FRAME

EMERGENCY

BALLAST

LIGHTOLIER a GENLYTE THOMAS company.

631 Airport Road, Fall River, MA 02720

FAEM3 specifications

The Lightolier FAEM3 is a sophisticated lighting solution designed to provide unparalleled energy efficiency and versatile application in both commercial and residential environments. This fixture is known for its sleek design, advanced technology, and the ability to integrate seamlessly with various architectural styles.

One of the standout features of the FAEM3 is its exceptional energy efficiency. Utilizing cutting-edge LED technology, the fixture offers significant energy savings, making it an environmentally friendly choice that reduces long-term operational costs. The FAEM3 not only minimizes energy consumption but also boasts a lengthy lifespan, reducing the need for frequent replacements and maintenance.

The FAEM3 is designed with versatility in mind. It is available in various configurations and can accommodate multiple color temperatures ranging from warm to cool white. This adaptability allows users to create specific ambiances tailored to different settings, whether it be a warm atmosphere for a restaurant or a brighter, cooler light for an office space. Additionally, the fixture can be easily dimmed, allowing for further customization of lighting levels based on needs and preferences.

Another key characteristic of the Lightolier FAEM3 is its innovative optical design. The fixture features a highly efficient lens system that distributes light evenly and minimizes glare, providing comfortable illumination for occupants. This design is particularly beneficial in environments where prolonged lighting exposure is common, such as workplaces and educational institutions.

The FAEM3 also incorporates advanced control options, making it compatible with smart lighting systems. This integration enables users to manage lighting remotely, adjust settings according to occupancy, and create schedules to enhance user experience and energy savings further. The incorporation of sensors for occupancy and daylight harvesting furthers its energy-efficient profile.

Furthermore, the construction of the FAEM3 reflects both durability and style. Made with high-quality materials, it is built to withstand the demands of varied environments while maintaining its aesthetic appeal. The minimalist design makes it suitable for inclusion in a wide range of interior settings without compromising on functionality or form.

In summary, the Lightolier FAEM3 stands out as an advanced lighting solution, featuring top-notch energy efficiency, versatile applications, innovative optical design, smart control options, and a durable yet stylish build. It is an ideal choice for those looking to enhance their lighting experience while being environmentally conscious. Whether for commercial or residential use, the FAEM3 embodies the future of intelligent lighting solutions.