Sort | It's used to exchange the numbers of two channels. |
Name | If channel name information is broadcast when you store the channels either |
| manually or automatically, the names are assigned to the channels directly. You can |
| however change these names or assign new names as required. |
Fine Tune | Due to weak signals or an incorrect antenna configuration, some of the channels |
| may not be tuned correctly. |
LNA | Amplifies signals when antenna reception is poor. However if incoming signals are |
| interfering with each other, turn off LNA as it malfunction. |
| • On / Off |
Setup
Available Mode 
: PC / DVI 
: TV 
: Ext. 
: AV 
: 
: Component
OSD | Description | Play |
Area | When you turn the power on of the product for the first time since it |
|
Configuration | released from a factory, menu to select location will appear. |
|
| Choose the region and country where you use the monitor. |
|
| This is because broadcasting type varies according to region and country. |
|
| You can select broadcasting type in OSD menu as well by selecting |
|
|
| |
| Note : This product can be used worldwide when area configuration is set |
|
| up regardless of broadcasting type. |
|
| Note : When country is not selected properly, the product may not locate |
|
| channels. |
|
Language | You can choose one of 8 language. |
|
| Note : The language chosen affects only the language of the |
|
| OSD. |
|
| It has no effect on any software running on the computer. |
|
Sleep Timer | Use to set the Monitor to turn off automatically a set number of minutes. |
|