Samsung MH17ASSS/ILC, MH17JSSS/XSJ manual Using the Stand, Folding the Base, Attaching the Base

Using the Stand

This monitor supports various types of VESA-standard bases. You need to either fold or remove the base in use in order to install a VESA base.

1. Folding the Base

The monitor may be reclined from 0 to 19 degrees.

2. Attaching the Base

This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.

A.Monitor

B.Mounting interface pad

1.Turn off your monitor and unplug its power cord.

2.Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.

3.You should fold the stand 90 degrees per fectly.

4.Align the Mounting Interface Pad with the holes in the Rear Cover Mounting Pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base.

To mount the monitor on a wall, you should purchase the wall mounting kit that allows you to mount the monitor at least 10cm away from the wall surface. Contact the nearest Samsung Service Center for more information.

Samsung Electronics will not be responsible for damages caused by using a base other than those specified.