Samsung MH17ASSS/ILC, MH17JSSS/XSJ, LS17MHASSZ/EDC Dimensions WxDxH/ Weight, Preset Timing Modes

Less than 43W

Power Saving

Less than 2W

Dimensions (WxDxH)/ Weight

389 x 206 x 402.5 mm / 15.3 x 8.1 x 15.8 inch

389 x 63 x 386mm / 15.3 x 2.5 x 15.2 inch ( Without Stand )

VESA Mounting Interface

75mm x 75mm

Environmental considerations

Operating	Temperature: 50°F to 104°F(10°C to 40°C)
	Humidity: 10% to 80%, Non-condensing
Storage	Temperature: -4°F to 113°F (-20°C to 45°C)
	Humidity: 5% to 95%, Non-condensing

Plug and Play Capability

This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings.

Design and specifications are subject to change without prior notice.

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use a software utility installed on your computer to set up this feature.

State	Normal Operation	Power saving mode	Power off
		EPA/ENERGY 2000	(Power-switch off)
Power Indicator	Green	Green Blinking	Black
Power Consumption	Less than 43W	Less than 2W	Less than 1W
	(on mode)	(Off-mode)	(115Vac)

This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality.

As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows.

Table 1. Preset Timing Modes