Samsung LS40BHYNSF/EDC, LS46BHTNBF/EDC, LS46BHYNBF/EDC, LS46BHPNS/EDC, LS40BHRNSF/EDC manual Source

Activates a highlighted menu item.

5)SOURCE

Switches from PC mode to Video mode.

Changing the source is only allowed for external devices that are connected to the LCD Display at the time. [PC] → [BNC] → [DVI] → [AV] → [S-Video] → [Component]

>>Click here to see an animation clip.

6)PIP

Push the PIP button to turn the PIP screen On / Off.

More than one PIP cannot overlap on screen as BNC and the component use the same terminal.

>>Click here to see an animation clip.

•PC

AV / S-Video / Component Mode

•BNC

AV / S-Video Mode

•DVI

AV / S-Video / Component Mode

•AV / S-Video

PC / BNC / DVI Mode

•Component

PC / DVI Mode

7) Power button

Turns the LCD Display On/Off.

8)Power indicator

Shows PowerSaver mode by blinking green.

9)Remote Control Sensor

Aim the remote control towards this spot on the LCD Display.

Note

•See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods.

Rear

Note

•For detailed information concerning cable connections, refer to Connecting Cables under Setup. The LCD Display 's configuration at the back may vary slightly depending on the LCD Display model.

1) POWER S/W ON [ ] / OFF [O]

Switches the LCD Display On/Off.

2) POWER IN

The power cord plugs into the LCD Display and the wall plug.