Samsung LF24VPNLB/EN, LF24VPNLB/XJ, LF24VPNLBSEN manual Power LED

ICON

DESCRIPTION

If the OSD is on the screen, use this button to select a function

When the OSD is not on the screen, use this button to switch the input signal (PC/DVI/VC).

When you switch the input signal by pressing the [ /SOURCE] button or when you turn the

product on, a message displaying the selected input signal appears at the top left of the

screen.

To select Digital (DVI) mode, you must connect the product to your PC with a DVI

cable.

Press this button to turn the product on or off.

Power LED

This LED is turned on when the product works normally.

The power LED can be found above the buttons on the bottom of the monitor.

For information about the power-saving function, refer to the power saving function

section of the product specifications. When not using the product for a long time,

unplugging the power cord is recommended to minimize power consumption.

Installing the Product

1-8