Samsung LF24VPNLB/XJ, LF24VPNLB/EN, LF24VPNLBSEN manual Troubleshooting, Monitor Self-Diagnosis

2 Troubleshooting

2-1 Monitor Self-Diagnosis

• You can check if the product is working properly by using the Self-Diagnosis function.

•If the monitor displays a blank screen and the Power LED blinks even if the product and the PC are connected, run the Self-Diagnosis function.

To run a Self-Diagnosis on your monitor, follow these steps:

1.Turn the monitor and the PC off.

2.Separate the D-Sub cable from the product .

3.Turn the monitor on.

4.If the monitor is working properly, the 'Check Signal Cable' message appears.

If this is the case, and your monitor continues to display a blank screen, make sure that there is no problem with the PC or with the connection between your monitor and the PC. The monitor is working properly.