Samsung UE32D5700RSXZF, UE40D5720RSXZF manual Connecting to a Common Interface slot, TV Rear

Connecting to a COMMON INTERFACE slot

Attaching the CI Card Adapter

Attach the adapter as shown below.

To connect the CI CARD Adapter, follow these steps.

✎✎We recommend attaching the adapter before installing the wall mount, or inserting the “CI or CI+ CARD”.

1.Insert the CI CARD Adapter into the two holes on the product 1.

✎✎Please find a two holes on the rear of the TV. A two holes is beside the COMMON INTERFACE port.

2.Connect the CI CARD Adapter into the COMMON INTERFACE port on the product 2.

3.Insert the “CI or CI+ CARD”.

TV Rear

We recommand that you insert the CI card before you mount the TV on a wall. It may be difficult to insert after the mounting.

Insert the card after attaching the CI-Module on TV. It is difficult to attach the module if you insert the card before attaching.

Using the “CI or CI+ CARD”

To watch paid channels, the “CI or CI+ CARD” must be inserted.

•• If you don’t insert the “CI or CI+ CARD”, some channels will display the message “Scrambled Signal”.

•• The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

•• When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated.

✎✎NOTE

xx You must obtain a “CI or CI+ CARD” from a local cable service provider.

xx When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it.

xx Insert the “CI or CI+ CARD” in the direction marked on the card.

xx The location of the COMMON INTERFACE slot may be different depending on the model.

xx “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer. xx If you have any problems, please contact a service provider.

xx Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen.

English - 12