Network Connection
Network Connection - Wireless
You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must first attach a “Samsung Wireless LAN Adapter” (WIS12ABGNX, WIS09ABGNX - sold separately) to the USB port on the side of your TV. See the illustration below.
English
Wireless IP sharer (wireless router having DHCP server)
The LAN Port on the Wall
LAN Cable
Samsung Wireless LAN
Adapter
TV Side Panel
(5V 0.5A)
✎✎It may differ depending on the model.
Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers and Ecommerce sites. Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video may not be played smoothly.
Most wireless network systems incorporate a security system that requires devices that access the network through an access point or wireless router (typically a wireless IP Sharer) to transmit an encrypted security code called an access key.
If HIGH PURE THROUGHPUT (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP or TKIP for your wireless router, Samsung TVs will not support a connection in compliance with new
Network Connection - Wired
There are two main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated below:
The Modem Port on the Wall | TV Rear Panel | |
External Modem | ||
| ||
| (ADSL / VDSL / Cable TV) | |
| LAN | |
Modem Cable | LAN Cable |
The LAN Port on the Wall | TV Rear Panel |
| LAN |
LAN Cable
✎✎It is not supported when the network speed is below or equal to 10Mbps. ✎✎Use Cat 5 (*STP Type) cable for the connection. *STP: Shielded Twist Pair ✎✎The service may not run as the service port is blocked in some network devices (AP).
English - 9