Still image warning, Caring for the TV

Still image warning

Avoid displaying still images (such as jpeg picture files), still image elements (such as TV channel logos, stock or news crawls at the screen bottom etc.), or programmes in panorama or 4:3 image format on the screen. If you constantly display still pictures, it can cause image burn-in on the LED screen and affect image quality. To reduce the risk of this adverse effect, please follow the recommendations below:

•• Avoid displaying the same TV channel for long periods.

•• Always try to display any image in full screen. Use the picture format menu of the TV for the best possible match.

•• Reduce brightness and contrast to avoid the appearance of after-images.

•• Use all TV features designed to reduce image retention and screen burn. Refer to the e-Manual for details.

Changing the TV’s password

> Settings > General > System Manager > Change PIN

1.Run Change PIN and then enter the current password in the password field. The default password is “0-0-0-0”

(France:“1-1-1-1”).

2.Enter a new password and then enter it again to confirm it. The password change is complete.

•• If you forgot your PIN code, press the buttons in the following sequence to reset the PIN to “0-0-0-0” (France: “1-1-1-1”):

For the Samsung Smart Remote: When the TV turns on: VOL → Volume Up → → Volume Down → → Volume Up → .

Caring for the TV

•• If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean the debris off before watching TV.

•• The exterior and screen of the TV can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to prevent scratches.

•• Do not spray water or any liquid directly onto the TV. Any liquid that goes into the product may cause a failure, fire, or electric shock.

•• To clean the screen, turn off the TV, then gently wipe away smudges and fingerprints on the panel with a micro-fiber cloth. Clean the body or panel of the TV with a micro-fiber cloth dampened with a small amount of water. After that, remove the moisture with a dry cloth. While cleaning, do not apply strong force to the surface of the panel because it can damage the panel. Never use flammable liquids (benzene, thinner, etc.) or a cleaning agent. For stubborn smudges, spray a small amount of screen cleaner on a micro-fiber cloth, and then use the cloth to wipe away the smudges.

English

English - 19