C18A_ENG_europe_17"_film 10/10/03 4:11 PM Page 41
Using the Tape Counter to Search for a Sequence
The tape counter:
◆Indicates the elapsed time in the play and record modes (hours, minutes and seconds)
◆Is reset when a cassette is inserted in the VCR unit
◆Enables you to find the beginning of a sequence easily
1Insert a cassette in your VCR unit.
2Press INFO twice.
Result: The tape counter is displayed:
00:00:00.
➢The tape counter does not necessarily start from zero at the beginning of the tape.
3Select the required operation (play, record,
Result: The tape counter indicates how long the cassette has been running.
4To set the tape counter to zero at the beginning of a sequence:
◆ Pess CLEAR ( X ) when you want to set the tape counter to zero.
5To set the tape counter to start at the beginning of a sequence:
◆ With the counter display on the screen, press ENTER ( ) to activate the memory (✱).
6To
◆ Press FF ( ) or REW ( ).
Result: With the memory (✱) the tape will stop automatically during FF or rewind when the count reaches the 00:00:00 position.
◆ Press PLAY ( ) to play at the count 00:00:00 position.
ENG
00:00:00
SP
00:00:00 ✱ |
SP |
41