C18A_ENG_europe_17"_film 10/10/03 4:11 PM Page 77
SCART Connector Wiring
ENG
If you wish to connect other equipment via the SCART connectors on your television, contact your dealer or a qualified technician to wire the A/V cable as illustrated below.
Pin | Signal |
| Pin | Signal |
|
|
|
|
|
1Audio output R
2Audio input R
3Audio output L
4Audio chassis return
5Video chassis return (RGB blue)
6Audio input L
7RGB blue input
8Switching voltage
9Video chassis return (RGB green)
10 | - |
11 | RGB green input |
|
|
12 | - |
13 | Video chassis return (RGB red) |
14 | - |
15RGB red input
16Blanking signal (RGB switching)
17Video chassis return
18Blanking signal ground
19Video output
20Video input
21Screening/chassis return
➢Pins 5, 7, 9, 11, 13, 15 and 16 are used for RGB processing.
Cleaning the Video Heads
If you find that the quality of the pictures is poor, you can use a special cleaning cassette (purchased from your local video dealer).
Insert the cleaning cassette and press the PLAY/PAUSE () button. After about 10 to 15 seconds, press the STOP (■), followed by OPEN/CLOSE () button to eject the cassette. Repeat the operation if necessary.
☛If the quality of the picture is not improved after having cleaned the video heads, refer to “Troubleshooting” on page 80.
77