YP-35 Quick Guide
Location of Controls
Microphone
SRS Button
Earphone Jack
|
| Neck strap Hook |
| Display |
|
| Play/Stop/Pause/ |
|
| Forward/Backward Button | Hold Switch |
|
| |
| MENU/Loop Repeating/ |
|
➡ | Mode/Volume Button |
|
USB Cable Connection Port |
| |
|
| |
| Battery Cover |
|
Playing Music
When you press the 
button, the yepp logo appears and a music/voice file is played.
Stopping Music
When you press the 
button while playing, the music stops. If no buttons are pressed within 10 seconds (changes depending on settings), the yepp automatically powers off.
● You can also turn off the power by pressing and holding the 
button.
1
Connecting the USB cable
➤Before connecting yepp to PC, make sure to install USB driver.
1 Plug one end of the USB cable into the USB port on the PC.
2 Connect the opposite end of the USB cable to the USB cable port on the bottom of the yepp.
● If you disconnect the USB cable from your PC while implementing a command or initializing during USB driver installation, your PC may not function correctly.
● The yepp will automatically turn on. |
|
| USB connect |
3 USB driver is installed with a message saying that |
|
| |
|
| ||
|
| ||
it is searching for a new device. You may not see |
|
| cable |
the display screen during installation. Go to the |
|
| |
|
|
| |
device manager to check that installation |
|
|
|
has been successfully completed. |
|
|
|
4 Upon installation of the USB driver |
|
|
|
|
|
| |
|
|
| |
"SAMSUNG |
|
|
|
[System Properties] ➝ [Device Manager]. |
|
|
|
2