Samsung HTDS900RH/EDC manual What is Progressive or Non-Interlaced Scanning?, Than 5 seconds

1p~40p(DS700)-GB-NOR 2004.3.10 9:32 AM Page 16

Connectingthe Video Out to TV

Make sure that turn off and disconnect the plug from outlet before moving or installing the product. In connecting to video, select one of following three methods that suits for TV and connect it.

P.SCAN(Progressive Scan) Function

Unlike regular Interlace Scan, in which two fields of picture information alternate to create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of infor- mation (all lines displayed in one pass) to create a clear and detailed picture without visible scan lines.

IMPEDANCE SUBWOOFER : 4Ω

FRONT / CENTER / REAR : 4Ω

CENTER	REAR	FRONT
	L	L
SUBWOOFER REAR		FRONT
	R	R

		METHOD 3
		METHOD 2
METHOD 1
TV
VIDEO	S-Video	COMPONENT
IN		IN

While the player is in the Stop mode, hold the P.SCAN button down for longer	CONNECTIONS
than 5 seconds.
• The selection switches back and forth between "P.SCAN" and "I.SCAN" each time the button is held
down for a minimum of 5 seconds.
• The previous mode is indicated in the display first, followed by the selected mode in about a second.

What is Progressive (or Non-Interlaced) Scanning?

Interlaced Scan (1 FRAME = 2 FIELDS) Progressive Scan (FULL FRAME)

METHOD 1 Composite Video ............... Good Quality

Connect the supplied video cable from the VIDEO OUT jack on the back panel of the sys- tem to the VIDEO IN jack on your television.

METHOD 2 S-Video ...............Better Quality

If you television is equipped with an S-Video input, connect an S-Video cable (not supplied) from the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on your television.

METHOD 3 Component (Progressive Scan) Video ............... Best Quality

If your television is equipped with Component Video inputs, connect a component video cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the cor- responding jacks on your television.

Note • When the Progressive scan mode is selected, the VIDEO and SCART outputs

do not feed any signal. See page 14 to select Progressive Scan.

In interlaced-scan video, a frame consists of two inter-	The progressive scanning method scans one full frame of
laced fields (odd and even), where each field contains	video consecutively down the screen, line by line.
every other horizontal line in the frame.	An entire image is drawn at one time, as opposed to the
The odd field of alternating lines is displayed first, and	interlaced scanning process by which a video image is
then the even field is displayed to fill in the alternating	drawn in a series of passes.
gaps left by the odd field to form a single frame.	The progressive scanning method is desirable for dealing
One frame, displayed every 1/30th of a second, contains	with moving objects.
two interfaced fields, thus a total of 60 fields are dis-
played every 1/60th of a second.
The interlaced scanning method is intended for capturing
a still object.

Note	•	This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support Progressive
		Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive scan TVs.)

•Depending on the brand and model of your TV, this function may not work.

13 14