Samsung HTDS900RH/XFO Connecting External Components, Connecting an External Digital Component

1p~40p(DS700)-GB-NOR 2004.3.10 9:32 AM Page 18

ConnectingExternal Components

Connecting an External Digital Component

Example: Digital signal components such as a Set-Top Box or CD Recorder.

Connecting an External Analog Component

Example: Analog signal components such as a VCR or TV.

CONNECTIONS

IMPEDANCE SUBWOOFER : 4Ω

FRONT / CENTER / REAR : 4Ω

CENTER	REAR	FRONT
	L	L
SUBWOOFER REAR		FRONT
	R	R

Optical Cable (not included)

DIGITAL OUT

IMPEDANCE

FRONT / CENTER /

FRONT

L

The AC Cord must be plugged into an

appropriate socket.

Before plugging your system into an AC outlet, you must check the voltage.

Check the position of the voltage selector on the rear of the system (OPTIONAL).

1.Plug the AC Cord on the rear of the system into an appropriate outlet.

2.Press the On/Standby button to switch your DVD Player system on.

Audio Cable

If the external analog

component has only one Audio Out, connect either left or right.

1

2

Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.

Press AUX on the remote control to select ‘DIGITAL IN’.

•Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.

•You can also use the FUNCTION button on the main unit.

The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.

1

2

Connect Audio In on the DVD player to Audio Out on the external analog component.

•Be sure to match connector colors.

Press AUX on the remote control to select AUX 1 or AUX 2.

•Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.

•You can also use the FUNCTION button on the main unit.

The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.

15 16