Setting
digital input
You can set the digital input for a DVD/SAT/CD player to either OPTICAL or COAXIAL.
√ 
REMOTE CONTROL
1 Press SETUP/MENU button, and then press ENTER button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
2 Press 
button to select the “DIGITAL IN”, and then press ENTER button.
3 Press 
button to select the the CD, DVD or SAT function.
•Each time you press this button, CD ➝ DVD ➝ SAT will be selected in turn.
4 Press …† button to set the digital input.
•Each time you press this button, COAXIAL ➝ OPTICAL2 ➝ OPTICAL1
will be selected in turn.
To exit setup mode
•Wait for about 5 seconds or press SETUP/MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
GB
MAIN UNIT
1Press SETUP button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
2 Press FUNCTION button to select the “DIGITAL IN”. | OPERATION |
3 Press SURROUND button to select the CD, DVD or | |
SAT function. |
|
• Each time you press this button, CD ➝ DVD ➝ SAT will be selected in turn. |
|
4Press SELECT( 
, 
) button to set the digital input.
•Each time you press this button, COAXIAL ➝ OPTICAL2 ➝ OPTICAL1 will be selected in turn.
To exit setup mode
•Wait for about 5 seconds or press SETUP button.
“SETUP OFF” appears on the display and the unit Setup Mode is exited.
• You can select only one digital input for each function. Example) If you have selected COAXIAL for the CD function, you cannot select COAXIAL for the DVD or SAT function.
Function | Digital input |
DVD | OPTICAL1 |
|
|
SAT | OPTICAL2 |
CD | COAXIAL |
|
|
24 | 25 |