Samsung AV-R710R/ELS manual Test tonecont’d, To Manually Output Test Tone, Test Tone Output

Test tone(cont’d)

Use test tone to check the speaker connection status or level.

To Manually Output Test Tone

√

REMOTE CONTROL

1 Press SETUP/MENU button, and then press ENTER button.

•“SETUP MODE” appears on the display and goes into Setup Mode.

2 Press button to select the “TEST-T MANU”, and then press ENTER button.

• You can adjust the speaker output level from -10 to +10dB by 1 step.

•Each time you press button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ S.B ➝ S.L ➝ S.W will be selected in turn.

3 Press …† button to set the test tone as you want.

•You can adjust the speaker output level from -10 to +10dB by 1 step.

• The sound gets quieter at -10dB and louder at +10dB.

To exit setup mode

• Press SETUP/MENU button once time.

“SETUP OFF” appears on the display and test tone stops.

Test Tone Output

	• F.L (front left) : -10 ~ +10dB
	• CEN (centre) : -10 ~ +10dB
	• F.R (front right) : -10 ~ +10dB
	• S.R (surround right) : -10 ~ +10dB
	• S.B (surround back) : -10 ~ +10dB
34	• S.L (surround left) : -10 ~ +10dB
	• S.W (subwoofer) : -10 ~ +10dB

GB

MAIN UNIT

1Press SETUP button.

• “SETUP MODE” appears on the display and the unit goes into Setup Mode.

2 Press FUNCTION button to select the “TEST-T MANU”.	OPERATION
3 Press SURROUND button.
• Each time you press this button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ S.B ➝ S.L ➝
S.W will be selected in turn.

4Press SELECT( , ) button to set the test tone as you want.

•You can adjust the speaker output level from -10 to +10dB by 1 step.

•The sound gets quieter at -10dB and louder at +10dB.

To stop test tone

•Press SETUP button 1 time.

“SETUP OFF” appears on the display and test signal stops.

35