Samsung HW-H751/XE, HW-H751/EN, HW-F751/XN, HW-H750/EN, HW-F751/TK, HW-F751/EN manual Multiroom Link

MULTIROOM LINK

4.Wait until the pairing indicator on the Soundbar stops flashing. If the Soundbar's LED indicator turns solid blue, pairing is complete. The Soundbar may also beep.

●● Place each Soundbar at least 50 cm from the HUB when connecting them to the HUB.

●● Your smart device cannot connect to the Soundbar or the HUB if there is no wireless router.

●● To confirm you have a proper connection, check the pairing indicator on the front of the HUB.

--When you turn on the HUB for the first time, there is a 20 minute pairing

period. The pairing indicator ( ) will blink for these 20 minutes or until pairing occurs. When you pressthe SPK ADD button to pair additional Soundbar's, the pairing period is reduced to 10 minutes.

The pairing indicator ( ) flashes for 10 minutes or until pairing occurs. Turn on the Soundbar you want to pair while the pairing indicator is flashing.

--If pairing mode has expired, press the SPK ADD button on the rear of the HUB to turn on pairing mode again. Then, turn the Soundbar off and then on or press the SPK ADD button on the rear of the Soundbar to link the Soundbar to the HUB.

●● For a proper connection, connect the HUB to your router before turning on the Soundbar.

--Connecting the Soundbar to the HUB may take a few minutes. --There will be a brief sound when the connection is established.

38