Samsung DVD-R4000EU manual Changing the remote control code, Press Setup

Changing the remote control code

Numbered buttons

3, 4, 2, 1

ENTER

1 While stopped

Press [SETUP] to show the menus.

SETUP	Antenna System	CATV
	Auto Channel Setting
Channel	Channel Caption
	Preset Channel Caption
Set Up
	Manual Channel Caption
Disc
Video	VCR PlusiCH Setting
Audio
Display	TAB SELECT
TV Screen	RETURN

2 Press [3, 4] to select “Set Up” and press [1].

3 Press [3, 4] to select “Remote Con- trol Code” and press [ENTER].

4 Press [3, 4] to select the code (1, 2, or 3) and press [ENTER].

The remote control code on the unit has been set.

5 While pressing [ENTER] on the remote control, press the numbered button ([1], [2] or [3]) corresponding to the code you selected in step 4.

The remote control code on the remote control has been set.

6 Press [SETUP]

The following display appears when you use a remote control with a different code.

The unit’s remote control code

If you are trying to use this unit’s remote control, change its code to match the unit’s (➜ step 5).

Advanced operation

45

DVD-R4000