Samsung DVD-R120/XEG, DVD-R120/XEF, DVD-R120P, DVD-R120/AFS, DVD-R120/XET manual Plug & Auto Set up

System Setup

Plug & Auto Set up

Your DVD Recorder will automatically set itself up when it is plugged in for the first time. TV stations and clock will be stored in memory. The process takes a few minutes. Your DVD Recorder will then be ready for use.

1 Connect the RF cable as indicated on page

19.

(Connecting Your DVD Recorder to the TV Using the RF Cable and scart cable.)

2 Plug the DVD Recorder into the mains.

“AUTO” in the front panel display flickers.

5 After Auto Channel Scan is completed, Auto Clock Setting will be started automatically in 10 seconds. If you want to start Auto Clock Setting immediately, press OK button. If you do not want to do Auto Clock Setting, press CANCEL or MENU button.

Auto channel scan completed successfully.

Press [OK] button to auto clock set.

OK Cancel

6 Wait until current date and time are displayed automatically. If you want to exit Auto clock setting, press MENU button.

Please wait. Now setting the clock.

If you want to exit clock setting,

press the [MENU] button.

3 Start the auto setup.

Auto setup will be started.

Check antenna and TV cable connection.

OK Cancel

4 Auto Channel scan will be started.

Channel scan

Now, Scanning.

5%

•The number of stations automatically stored by the DVD Recorder depends on the number of stations that it has found.

7 Check the date and time.

No Disc				Clock Set
Programme
Setup	Time	Date		Auto Clock
	12 : 00	01 / JAN /	2005	SAT On
MOVE	OK	RETURN		EXIT

•if it is : Correct, press OK button then the date and time will be saved. If you don't press the OK button, the date and time will be saved automatically after 5 seconds.

•if it is : Incorrect, input correct Time, Date, Year using †…œ

√buttons or number buttons. Press OK button then the date and time will be saved. When you need to change clock setting, you can set up it manually.

(see page 27)

■Now, DVD Recorder is ready for use. Function for “Plug & Auto Set Up” is fixed already. So if you

NOTE	want to change this fixed one, you can change it
	by Presetting the Stations in OSD “Presetting
	Channels with the Manual set up function” menu.
	(see page 29)

■Auto Set up function can be performed by pressing é (STOP) on the unit continuously for 5 seconds or more during power off with no disc inserted.

26- English