Settings
6.The product detects the wired connection, verifies the network connection, and then connects to the network.
7.Press the 
(OK) button.
ĞĞWired - Manual
If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.
Follow Steps 1 and 3 in Wired - Automatic, and then follow these steps:
1.Select Network Status. The product searches for a network, and then displays the connection failed message.
2.On the bottom of the screen, select IP Settings, and then press the (OK) button. The IP Settings screen appears.
3.Select the IP Settings field, and then press the 
(OK) button.
4.Select Enter manually in the IP Settings field, and then press the 
(OK) button.
5.Select a parameter to enter (IP Address, for example), and then press the (OK) button. Use the Up/Down buttons on the remote control to enter the numbers for the parameter.
Use the Left/Right buttons on the remote control to move from entry field to entry field within a parameter. When done with one parameter, press the (OK) button.
6.Press the Up or Down button to move to another parameter, and then enter the numbers for that parameter following the instructions in Step 5.
7.Repeat Steps 5 and 6 until you have filled in all parameters.
NOTE
\\ You can get the Network parameters from your Internet provider.
8.When finished entering all the parameters, select OK, and then press the (OK) button. The product verifies the network connection and then connects to the network.
Upgrading Software
This menu allows you to upgrade the product's software for performance improvements or additional services.
•Never turn the product off or back on manually during the update process.
1.In the Home screen, select Settings, and then press the (OK) button.
2. Select Support, and then press the (OK) button.
3.Select Software Update, and then press the (OK) button.
4.To download update software and update now, select Update Now, and then press the
(OK) button.
5.To let the product download update software automatically when available, select Auto Update, and then press the (OK) button. See "Auto Update" on page 23 for details.
NOTES
\\ The upgrade is complete when the product turns off, and then turns on again by itself.
\\ Samsung Electronics takes no legal responsibility for any product malfunction caused by an unstable Internet connection or consumer negligence during a Software Update.
\\ If you want to cancel the upgrade while the upgrade software is downloading, press the
(OK) button.
\\ This option requires an Internet connection.
22 English