Listening to Radio
You can listen to the chosen band (FM, MW, LW broadcast stations) by using either the automatic or manual tuning operation.
| Remote Control Unit |
|
| ||
|
|
|
|
| |
|
|
|
|
|
|
1 |
| Press TUNER/ | 2 | Tune in to the | |
| BAND button. | desired station. | |||
|
|
|
|
|
|
Presetting Stations
You can store up to:
15 | FM stations | • FM | Frequency Modulation |
8 MW stations | • AM(MW) | Medium Wave | |
7 | LW stations | • LW | Long Wave |
Example: Presetting FM 89.1 in the memory
Press the |
|
|
|
TUNER(BAND) | Press | to | Press the TUNER |
1button and select | 2 select "89.10". | 3 MEMORY button. | |
•The selection toggles back and forth between "FM ➝ MW ➝ LW" each time the TUNER(BAND) button is pressed.
Automatic Tuning 1
Automatic Tuning 2
Manual Tuning
When 
is pressed, a preset broadcast station is selected.
Press and hold
to automatically search for active broadcasting stations.
Briefly press 
to increase or decrease the frequency incrementally.
• Each time the button is pressed, | • Refer to Step 2 on page 55 to | • “PROGRAM” flashes in the | |
the band switches between | automatically or manually tune in | display. |
|
"FM ➝ MW ➝ LW". | to a station. |
|
|
MHZ | MHZ | PROGRAM | MHZ |
| TUNED |
|
|
kHz
Main Unit
Press the Function
1button to select the desired band (FM, MW, LW).
2 Select a broadcast station.
Automatic Tuning 1 Press the STOP ( 
)
button to select
PRESET and then press 
button to select the preset station.
Automatic Tuning 2 Press the STOP ( 
) button
to select "MANUAL" and
then press and hold 
button to automatically search the band.
Manual Tuning Press STOP ( 
) to select MANUAL and then briefly
press 
to tune in to a lower or higher frequency.
4 Press 
to select preset number.
•You can select between 1 and 15.
PROGRAMMHZ
5 | Press the TUNER | 6 |
| To preset another |
| station, repeat | |||
MEMORY button. |
| |||
| steps 2 to 5. | |||
|
|
|
|
|
•Press the TUNER MEMORY button before ‘PROGRAM’ disappears from the display.
•‘PROGRAM’ disappears from the display and the station is stored in memory.
MHZ
RADIO OPERATION
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
55 | • | Each time the button is pressed, the sound switches between "STEREO" and "MONO". | |
• | In a poor reception area, select MONO for a clear, | ||
|
To tune in to a preset station, press 
on the remote control to select a channel.
56