Samsung HT-E5500/ZF Networks and the Internet, Configuring Your Network Connection, Wired Network

Settings

Networks and the Internet

When you connect this product to a network, you can use network based applications and functions such as Smart Hub and BD-LIVE, and upgrade the product's software through the network connection. For more information about accessing and using Internet services, see the Network Services chapter of this manual on pages 54~56. Instructions for configuring the network connection start below.

Configuring Your Network Connection

Before you begin, contact your ISP to find out if your IP address is static or dynamic. If it is dynamic, and you have a wired or wireless network, we recommend using the Automatic configuration procedures described below.

If you are connecting to a wired network, connect the product to your router using a LAN cable before you start the configuration procedure.

If you are connecting to a wireless network, disconnect any wired network connection before you begin.

To begin configuring your network connection, follow these steps:

1 . In the Home screen, select Settings, and then press the E button.

2 . Select Network, and then press the E button.

3 . Select Network Settings, and then press the

Ebutton.

4 . Go to the instructions for Wired networks starting below or the instructions for Wireless networks starting on page 33.

Wired Network

❑Wired – Automatic

After following Steps 1 to 3 above:

1 . Select Start in the Network Settings screen, and then press the E button. The product detects the wired connection, verifies the network connection and then connects to the network.

32 English

❑Wired - Manual

If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.

After following Steps 1 to 3 above:

1 . Select Start in the Network Settings screen, and then press the E button. The Network Status screen appears. The product attempts to verify the network connection and fails.

Network Settings

Wired network connection failed.
MAC Address	XX:XX:XX:XX:XX:XX		Previous
IP Address		0.0.0.0
Subnet Mask		0.0.0.0
Gateway		0.0.0.0	IP Settings
DNS Server		0.0.0.0	Retry
Unable to connect to the network. Try the following:
			OK
check if your IP address is set correctly in IP Settings.

Contact your Internet service provider for more information.

2 . Select IP Settings on the right of the screen, and then press E button.

The IP Settings screen appears.

3 . Select the IP Mode field, and then set it to Manual.

4 . Use the number keypad on your remote to enter the Network values. Use the ▲▼◄► buttons on the remote to move from entry field to entry field.

NOTE

You can get these values from your Internet provider. You can also view these values on most Windows computers. For instructions, see "Getting the Network Settings Values." on this page.

5 . When done, highlight OK, and then press E button. The product verifies the network connection and then connects to the network.

< Getting the Network Settings Values >

You can view your Network Settings values on most Windows computers. To view the Network Settings values, follow these steps:

• Windows XP

1 . Right click the Network icon on the bottom right of the Windows desktop.

HT-E5500_XU_0223.indd 32 2012-02-23 오후 2:23:42