Samsung HT-E8200/ZF, HT-E8200/XN, HT-E8200/EN manual By Disc, By downloaded, Standby Mode Upgrade

Page 34

Settings

11 . In the product’s menu, go to Settings > Support > Software Update.

12 . Select By USB.

NOTE

There should be no disc in the product when you upgrade the software using the USB Host jack.

When the Software Update is done, check the software details in the Software Update menu.

Do not turn off the product during the Software Update. It may cause the product to malfunction.

Software Updates using the USB Host jack must be performed with a USB flash memory stick only.

By Disc

1 . Visit www.samsung.com.

2 . Click SUPPORT on the top right of the page.

3 . Enter the product's model number into the search field, and then click Find Product.

4 . Click Get downloads in the centre of the page below the Downloads header.

5 . Click Firmware in the centre of the page.

6 . Click the ZIP icon in the File column on the right side of the page.

7 . Click OK in the pop-up that appears to download and save the firmware file to your PC.

8 . Unzip the zip archive to your computer. You should have a single .RUF file.

9 . Write the RUF file onto a disc. We recommend a CD-R or DVD-R.

10 . Finalise the disc before you remove it from your computer.

11 . Insert the disc into the product.

12 . In the product’s menu, go to Settings > Support > Software Update.

13 . Select By Disc.

NOTE

When the system upgrade is done, check the software details in the Software Update menu.

Do not turn off the product during the Software Update. It may cause the product malfunction.

34 English

By downloaded

The By downloaded option lets you upgrade using a file the product downloaded earlier but you decided not to install immediately.

1 . If upgrade software has been downloaded, you will see the software version number to the right of By downloaded.

2 . Select By downloaded, and then press the

Ebutton.

3 . The product displays a message asking if you want to upgrade. Select Yes. The product begins the upgrade.

4 . When the update is complete, the product turns off automatically, and then turns on.

NOTE

When the system upgrade is done, check the software details in the Software Update menu.

Do not turn off the product during the Software Update. It may cause the product to malfunction.

Standby Mode Upgrade

You can set the Standby Mode Upgrade function so that the product downloads new upgrade software when it is in Standby mode.

In Standby mode, the product is off, but its Internet connection is active. This allows the product to download upgrade software automatically, when you are not using it.

1 . Press the ▲▼ buttons to select Standby Mode Upgrade, and then press the E button.

2 . Select On or Off.

If you select On, the product will automatically download new upgrade software when it

is in Standby mode with the power off. If it downloads new upgrade software, the product will ask you if you want to install it when you turn the product on.

NOTE

To use Standby Mode Upgrade function, your product must be connected to the Internet.

If this function does not appear, you can upgrade to the latest software and use it.

HT-E8200_XU_0315.indd 34

2012-03-15 오후 1:11:13

Page 33 Page 35
Image 34
Page 33 Page 35
Contents 1CH Blu-ray Please register your product atBy the Earth Symbol , or Coloured Green or Green and Yellow Safety InformationWiring the Main Power Supply Plug UK Only Important NoticeDisc Storage & Management Using the 3D FunctionImportant Health and Safety Information for 3D Pictures Handling CautionsCopyright LicenceSafety Information English Contents Disk and Format Compatibility Disc types and contents your product can playGetting Started Disc types your product cannot playSupported Formats Region CodeLogos of Discs the product can play Music File SupportWMA Video File SupportLpcm AACAdvanced Video Codec High Definition MPEG4 SP, ASPAccessories Check for the supplied accessories belowDisplay Front & Side PanelRear Panel SlotRemote Control Tour of the Remote ControlIf the TV turns off, the setting is complete Installing batteries in the Remote ControlSetting the Remote Control Remote control will work with Samsung TVs by defaultConnections Connecting the Wireless SubwooferRear of the Subwoofer Connecting the FM Antenna Attaching the Toroidal Ferrite Core to the Power CordInstalling the Cradle Stand Installing the Wall Mount Installation PrecautionsConnecting to a TV Cable not suppliedConnecting to External Devices Broadband modem With integrated router Or service Router Connecting to a Network RouterWired Network Broadband ModemInitial Settings Procedure SettingsAccess steps may differ depending on the menu you selected Button You have four choices Enter numbers by pressing the number buttons on your remoteThen press the E button. The TV Aspect Ratio screen appears Home Screen Accessing the Settings ScreenButtons on the Remote Control Used for the Settings Menu Enter / Direction ButtonSettings Menu Functions DisplayAudio Network System HDMI-CECSupport Wired Network Configuring Your Network ConnectionNetworks and the Internet Wireless General Manual Wireless NetworkWpspbc Wi-Fi Direct Select WPSPBC, and then press the E buttonSoft AP AllShare SettingsTo Set the Soft AP Security Key By USB Upgrading SoftwareOnline Click Support on the top rightBy Disc Standby Mode UpgradeBy downloaded AllShare Play Screen Using the AllShare Play ScreenMedia Play Playing My List ItemsPlaying Files on a USB Storage Device AllShare PlayPlaying Commercial Audio Discs Function ScreenOptions on the Function Screen Playing Commercial Video DiscsUsing the AllShare Network Function Playing a Disc with User Recorded ContentTo Download the AllShare Software Smart Phone Disc Menu Buttons on the Remote Control used for Video PlaybackControlling Video Playback Title MenuMenu that appears only when a file plays Using the Tools MenuMenu that appears only when BD/DVD disc Plays BonusviewRepeating Tracks on an Audio CD Buttons on the Remote Control used for Music PlaybackControlling Music Playback Shuffling Tracks on an Audio CDWhat is Bluetooth? Using BluetoothRipping To disconnect the Home Cinema from the Bluetooth device To connect the Home Cinema to a Bluetooth deviceTo disconnect the Bluetooth device from the Home Cinema Connect Bluetooth devicePlaying Photo Contents Using the Tools Menu when a File Is HighlightedEarliest to latest date Login / OutEarliest Date MonthlySetting Mono/Stereo Using Buttons on the Remote ControlListening to Radio Using the Special Effects Remote Control Buttons Presetting StationsDSP Smart Hub at a Glance Network ServicesUsing Smart Hub On the Download Centre page, click the Manuals tabUsing the Web Browser Web Browser at a GlanceBD-LIVE Appendix Additional InformationSettings Audio Return ChannelAllShare Play Playing back a USB Storage DeviceResolution according to the output mode Bitstream Digital Output SelectionPCM AV receiverTroubleshooting Then, press the Power button Symptom Check/Remedy Product is notRating level password Features or action cannot be completed at this time becauseCheck the connection Symptom Check/Remedy AllShare Play functionThrough AllShare Play AllShare PlaySpecifications Correct disposal of batteries in this product Area Contact Centre  Web Site ` Europe
Related manuals
Manual 244 pages 27.41 Kb Manual 244 pages 62.1 Kb Manual 1 pages 57.54 Kb Manual 183 pages 34.69 Kb Manual 305 pages 9 Kb Manual 63 pages 43.35 Kb Manual 63 pages 55.02 Kb Manual 63 pages 21.37 Kb Manual 1 pages 38.3 Kb
Top Page Image Contents