Samsung HT-F5200/EN Upgrading Software, Through the Wi-Fi Device, Through the Product Using PBC

Settings

Wi-Fi Direct

Device Name : [HTS]-F5500

Select your Wi-Fi Direct device to connect to.

AndroidXXXXXXXDisconnected

Refresh

Close

5.You have three ways to complete the Wi-Fi connection:

•Through the Wi-Fi device.

•Through the product using PBC.

•Through the product using a PIN.

Each is covered below.

Through the Wi-Fi Device

1.On the Wi-Fi device, follow the device's procedure for connecting to another Wi-Fi Direct device. See the device's user manual for instructions.

2.When you have completed the procedure, you should see a pop-up on your TV screen saying that a device that supports Wi-Fi Direct has requested to connect. Select OK, and then press the E button to accept.

3.The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.

•The PBC and PIN procedures connect devices automatically.

Through the Product Using PBC

1.Select the Wi-Fi Direct device you want to connect to this product, and then press the E button.

2.The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.

Through the Product Using a PIN

1.Select the Wi-Fi Direct device you want to connect to this product, and then press the E button.

2.The PIN pop-up appears.

3.Note the PIN code in the pop-up, and then enter it into the appropriate field in the Wi-Fi Direct device you want to connect.

4.The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.

NOTES

The current wired or wireless network connection will be disconnected when you use the Wi-Fi Direct function.

Text files, such as files with a .TXT or .DOC extension, will not display when you are using the Wi-Fi Direct function.

Upgrading Software

The Software Update menu allows you to upgrade the product’s software for performance improvements or additional services.

•Never turn the product off or back on manually during the update process.

1.In the Home menu, select Settings, and then press the E button.

2.Select Support, and then press the E button.

3.Select Software Update, and then press the E button.

4.To download update software and update now, select Update now, and then press the E button. See "Update now" on the next page for details.

5.To let the product download update software automatically when available, select Auto Update, and then press the E button. See "Auto Update" on the next page for details.

NOTES

The upgrade is complete when the product turns off, and then turns on again by itself.

Samsung Electronics takes no legal responsibility for product malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade.

If you want to cancel the upgrade while the upgrade software is downloading, press the E button. When a system upgrade is progress, "UPDATE" is displayed on the front panel.

26 English