Samsung HT-J7750W/EN, HT-J7500W/EN, HT-J7500W/ZF manual Sound Effect and 3D Sound are not, Equaliser

Settings

✎✎Speaker Test Order

HT-J7500W :Front Left ; Front Right ;

Centre ; Surround Left ; Surround Right

;Subwoofer

HT-J7750W :Front Left ; Front Right ;

Centre ; Surround Left ; Surround Right

; Front Top Left ; Front Top Right ;

Subwoofer

Speaker Settings (Multiroom Link) : You can enjoy sound through a remote speaker that is connected to the home cinema through your home network. To use the network speaker, select Multiroom. If there is a network speaker available, it will appear on the screen.

-- Don't Use : The network speaker is not used.

-- Multiroom : The network speaker outputs audio. All network speakers output the same audio regardless of channel using the PCM format only.

✎✎SOUND EFFECT and 3D SOUND are not

applied if Multiroom is set to on.

✎✎The network speaker is not available when Screen Mirroring is active.

✎✎For further details, refer to the Multiroom Link manual from the web site. www.samsung.com > Support > Search for the product name > Multiroom Link > Download PDF

Sound Customiser

Sound Customiser lets you calibrate the home cinema for the optimal sound quality based on your hearing level and the ambient conditions.

To create a Custom Sound Profile, follow these steps:

1.In the Sound Customiser Menu, select Add Custom Sound.

2.On the next screen, select Start. The Preview screen appears.

3.Select Preview to preview the Test Sound. Select Next, and then press OK to continue.

4.A 6-step test will start. During each stage, the TV will sound a test tone at a different frequency. The tone will begin softly and increase in volume. Select Yes when you can hear the test tone. If you want to listen to it again, select Retry. Each time you select Yes, the TV will move on to the next tone. Once the test is complete, a screen appears that lets you compare the original sound to the calibrated sound.

5.Select Next, and then press the OK button to continue. The on-screen keyboard appears with a default profile name.

6.Enter a name for the calibrated sound profile or accept the default name, select Done, and then press the OK button.

7.Select Done on the next screen, and then press the OK button. The Sound Customiser screen reappears.

Custom Sound Profile : Select a Sound Profile you created to activate it. Or select Hearing Impaired, a Custom Sound Profile especially composed of large sounds for those with hearing disorders.

✎✎If there are more than 3 Custom Sounds registered, Family mode will be activated which is composed of the average value of all registered profiles.

Add Custom Sound : Create and add a new Custom Sound Profile. See the instructions above.

Edit Custom Sound : Choose a Custom Sound Profile to modify it. Follow the same steps you used when creating a sound profile. This function is only available if you have added a Custom Sound Profile using Add Custom Sound. (See above.)

Manage Custom Sound : Rename or delete Custom Sound Profiles. This function is only available if you have added a Custom Sound Profile using Add Custom Sound. To select a profile, highlight the check box to the right of the profile, and then select Rename or Delete.

Equaliser

Lets you configure the Equaliser settings manually.

18 - English