Samsung HT-J7750W/EN manual Product is not, Working, Example The power, Goes off or you hear a

Appendix

Symptom Check/Remedy

The menu screen does not ●● Are you using a disc that does not contain menus? appear even when you

select the menu function.

The aspect ratio cannot be changed.

●●The home cinema can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or 4:3 Pan-Scan mode, but plays 4:3 Blu-ray/DVD discs in 4:3 mode only. Refer to the Blu-ray Disc jacket, and then select the appropriate aspect ratio.

●● The product is not	●● Press and hold the remote control's e(EXIT) button for 5 seconds in
working.	STANDBY mode. This will reset the unit.
(Example: The power	-- Using the RESET function will erase all stored settings.
goes off or you hear a
	Do not use this function unless necessary.
strange noise.)
●● The Product is not
working normally.
You have forgotten the	●● With no disc in the product, press and hold the product's @ button for
rating level password.	longer than 5 seconds. INIT appears on the display and all settings will return
	to their default values.
	-- Using the RESET function will erase all stored settings.
	Do not use this function unless necessary.
Can't receive radio	●● Is the antenna connected properly?
broadcasts.	●● If the antenna's input signal is weak, install an external FM antenna in an
	area with good reception.

While listening to TV audio ●● If you press the OPEN/CLOSE ^ button while listening to TV audio using the

through the product, there	D. IN or AUX functions, the Blu-ray/DVD disc functions are turned on and
is no sound.	the TV audio is muted.

"Not Available" appears on ●● The feature is unavailable or the action cannot be completed at this time

screen.because:

1.The Blu-ray/DVD disc's software restricts it.

2.The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)

3.The feature is not available at the moment.

4.You’ve requested a title or chapter number or search time that is out of range.

If the HDMI output is set to a resolution your TV cannot support (for example, 1080p), you may not see a picture on your TV.

●●Press and hold the @ button on front panel for more than 5 seconds with no disc in the product. All settings will revert to their factory settings.

No HDMI output. ●● Check the connection between the TV and the HDMI jack of the product.

●●Check if your TV supports 576p/480p/720p/1080i/1080p HDMI input resolution.

Abnormal HDMI output ●● If random noise appears on the screen, it means that TV does not support

appears on the screen. HDCP (High-bandwidth Digital Content Protection).

60 - English