Parts
PortDescription
Reverse Side
ED32D ED40D
HDMI IN | Connects to a source device using an HDMI cable. |
|
|
SERVICE (5V 0.5A) | This port is used to upgrade the software. |
|
|
RGB IN | Connects to a source device using a |
|
|
DVI IN | Connects to a source device using a DVI cable or |
|
|
AUDIO OUT | Connects to the audio of a source device. |
|
|
RGB / DVI / HDMI / AV / COMPONENT | Connect to audio input using an audio cable. |
AUDIO IN |
|
| RS232C IN | Connects to MDC using an |
| RS232C OUT |
|
Remote Sensor | COMPONENT / AV IN | Connects to a source device using the Component/AV cable. |
| ||
ED46D ED55D |
|
|
| Remote Sensor | To control the remote control in front of the product, lower the remote control |
| POWER | sensor in the direction of the arrow. |
|
| Use the remote control within 7m to 10m from the sensor on the product at an |
|
| angle of 30 from the left and right. |
――Store used batteries out of reach of children and recycle.
――Do not use a new and used battery together. Replace both batteries at the same time.
――Remove batteries when the remote control is not to be used for an extended period of time.
15