Samsung LH40EDCPLBC/XY manual Auto Turn Off, Switching between Anynet+ Devices, Anynet+ HDMI-CEC

Anynet+ (HDMI-CEC)

Anynet+ (HDMI-CEC)	On
Auto Turn Off	Yes

-- The displayed image may differ depending on the model.

Auto Turn Off

Setting an Anynet+ Device to turn Off automatically when the product is turned off.

•• No / Yes

――If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the product powers off. ――May not be enabled depending on the device.

Switching between Anynet+ Devices

1	Press the TOOLS button, select Anynet+ (HDMI-CEC), and then press		.
2	Select Device List, and then press the	button.

If you cannot find a device you want, select Refresh to refresh the list.

3 Select a device, and then press the button. You can switch to the selected device.

――The Device List menu appears only when you set Anynet+ (HDMI-CEC)to On in the System menu.

――Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while switching is in progress.

――If you have selected an Anynet+ device by pressing the SOURCE button and then selecting its input source, you cannot use the Anynet+ function.

――Make sure to switch to an Anynet+ device by using the Device List.

79