Samsung LH040IFHTDS/EN, SBB-SNOWH3U/EN, LH025IFHSAS/EN, LH025IFHTAS/EN IR sensor is not functioning

Page 90

Other issue

HDMI Black Level is not functioning properly on an HDMI device with YCbCr output.

This function is available only when a source device, such as a DVD player and STB, is connected to the product via an HDMI (RGB signal) cable.

The IR sensor is not functioning.

Make sure the sensor light turns on when a button is pressed on the remote control.

•• If the light does not turn on, turn the power switch off and then on again.

If the sensor light still does not turn on after the power switch is turned off and then on again, an internal jack may be disconnected.

Contact your nearest service center to have the product serviced.

In power-saving mode, when the input source is DisplayPort, PC display settings cannot be saved.

Go to System → Power Control and set Max. Power Saving to Off. Alternatively, configure the PC display output settings again. Ensure the set is turned on.

When booting the PC with the input source set to

Boot the PC when the set is turned on or when the input source is not DisplayPort.

DisplayPort, the BIOS and booting screens do not appear.

 

 

 

90

Page 89 Page 91
Image 90
Page 89 Page 91
Contents SNOW-1703U SNOW-1703ULD Table of contents Picture Support Specifications Before Using the Product CopyrightDo not use multiple products with a single power socket Safety PrecautionsElectricity and Safety Do not place the power cord or product near heat sourcesKeep the plastic packaging out of the reach of children InstallationHave a technician install the wall-mount hanger Do not set down the product on its frontOperation Do not drop objects on the product or apply impactEnsure the vents are not blocked by tablecloths or curtains Keep the DC power adapter in a well-ventilated area CleaningDo not put DC power adapters together Do not use humidifiers or stoves around the productFront Side SNOW-1703U / SNOW-1703ULD PreparationsParts Parts DescriptionReverse Side SNOW-1703U / SNOW-1703ULD RJ45Data OUT Forward Interface Gender Card I/G CardData in Reverse Connects an external IR cable to the ECO Sensor portReverse Side IFH / IFH-D DataRemote Control Power on the product Stop the screen Change the input sourceTo place batteries in the remote control Turn on or off the Smart Signage deviceCable Connection Remote Control SNOW-1703U / SNOW- 1703ULD model onlyPin Signal RS232C CablePin No Standard Color Signal LAN CableGnd Direct LAN cable PC to HUB Connector RJ45Signal Cross LAN cable PC to PCConnection ConnectionCommand Viewing control state Get control commandControlling Set control command Command type Value rangePower control Input source controlSafety Lock Safety lock code to be set on a product OFF Ack Safety LockViewing the safety lock state Get Safety Lock Status Safety Lock Safety lock code to be set on a product NakConnecting to a PC Connecting and using devicesBefore Connecting Connection Using an Hdmi CableConnection Using an HDMI-DVI Cable Connection Using an DP CablePrecautions for using DP Connecting to a Video Device Using an Hdmi cable or Hdmi to DVI CableConnecting the LAN Cable SNOW-1703U / SNOW-1703ULD Installation PrecautionsInstalling the cabinets Removing the protective bracketsReplacing the cabinet module Precautions when handling the cabinets Connections Connecting to cabinetsModel Name Operating Recommended Voltage Card First cabinet Last cabinetEdit Changing the Input sourceSource InformationGeneral SettingsWeb Browser Search EnginePrivacy & Security Blocked pagesApproved pages Refresh Options Installing Using LED Signage ManagerInstalling / Uninstalling the software UninstallingPlayer Player featureViewing content No. DescriptionControl buttons on the remote When content is runningAvailable menu Button FunctionFile Formats Compatible with Player Network Schedule MultiframeTemplate files and LFD.lfd files Contents Video ImagePower Point WordTemplate files Creation/editing/playback are only available in MyTemplates View a thumbnail image and brief information of the content → Schedule → ESelect between server and external memory Clone Product → Clone Product → EDevice? message appears Device ID ID Settings→ ID Settings → E PC Connection CableHorizontal x Vertical Video WallVideo Wall Screen PositionFormat Network Status → Network Status → EPicture Mode On/Off Timer On Timer→ On/Off Timer → E Off Timer Holiday ManagementTicker → Ticker → EURL Launcher → URL Launcher → EURL Launcher Settings → URL Launcher Settings → EEnter your ID and password to log Approving a connected device from the serverSetting the current time Select Edit → SetupSelect your device MMENU → Picture → Picture Mode → E PictureWhite Balance Color TemperatureContrast / Brightness / Sharpness / Color / Tint G/R PointAdvanced Settings GammaLED Picture Size Reset Picture Picture OptionsAuto Protection Time OnScreen DisplayScreen Protection MMENU → OnScreen Display → Screen Protection → ELanguage Reset OnScreen DisplayMessage Display Menu SizeNetwork Open Network SettingsMMENU → Network → Open Network Settings → E MMENU → Network → Network Status → ENetwork Settings Connecting to a Wired NetworkAutomatic Open Network Settings Manual Open Network SettingsManually Server Network Settings Device NameMenu Transparency AccessibilitySystem High ContrastStart Setup TimeAuto Source Switching Power ControlEco Solution Fan & Temperature Input Device ManagerPlay via Change PIN SecurityGeneral Smart SecurityAnynet+ HDMI-CEC Disconnecting ProblemProblem Possible Solution System menuHdmi Hot Plug Reset SystemGame Mode Custom LogoSupport Software UpdateReset All Contact SamsungRead the following before using media play with a USB device Playing photos and videos Media PlayCompatible devices with media play File system and formatsRemoving a USB device Using a USB deviceConnecting a USB device → Player → Options → Safely RemoveFeatures provided in the media content list Filter By OptionsOption Name Operations Available buttons and features during photo playback Available buttons and features during video playbackChecking the Resolution and Frequency Troubleshooting GuideTesting the Product Power off both the PC and productNot Optimum Mode is displayed Installation issue PC modeScreen issue Check the followingsAdjust Brightness and Contrast Display looks unstable and then freezes Brightness and color do not look normalSharpness Screen cannot be displayed in full screenRemote control issue Source device issueOther issue When booting the PC with the input source set to IR sensor is not functioningHow do I set powersaving mode? SettingsHow can I change the resolution? Question AnswerSpecifications Model NameLED pixel size W x H LED pixel configurationCabinet Pixel Pitch Pixels Row x ColumnPreset Timing Modes SNOW-1703U / SNOW-1703ULD Normal mode Horizontal FrequencyPage Page Appendix Responsibility for the Pay Service Cost to CustomersProduct damage caused by customers fault Not a product defectLicense AcknowledgementYou may also find a copy of the source at following website
Related manuals
Manual 99 pages 7.61 Kb Manual 99 pages 50.03 Kb Manual 99 pages 49.69 Kb Manual 99 pages 50.5 Kb Manual 99 pages 17.74 Kb Manual 99 pages 37.97 Kb Manual 99 pages 6.62 Kb Manual 99 pages 61.15 Kb Manual 96 pages 54.63 Kb Manual 99 pages 57 b Manual 99 pages 59.26 Kb Manual 99 pages 23.05 Kb Manual 99 pages 58.25 Kb Manual 99 pages 7.59 Kb Manual 99 pages 18.46 Kb

LH060IFHSDS/UE, SBB-SNOWH3U/EN, LH015IFHSAS/EN, LH025IFHTAS/EN, LH020IFHSAS/EN specifications

Samsung has long been a leader in the display and LED technology market, and its range of commercial display solutions reflects this legacy of innovation and quality. Among their offerings, the Samsung LH025IFHSAS/EN, LH040IFHTDS/EN, LH015IFHTAS/EN, LH020IFHSAS/EN, and LH025IFHTAS/EN models stand out due to their advanced features and capabilities designed for various professional environments.

The Samsung LH series is known for its exceptional high-definition resolution and brightness, which ensures clear and vibrant images even in environments with high ambient light. These displays boast a brightness level of up to 2,500 nits, making them suitable for outdoor applications as well as well-lit indoor settings. This high brightness coupled with a high contrast ratio allows for superb image quality, ensuring that visuals maintain their impact regardless of surrounding light conditions.

One of the main technologies deployed across these models is HDR, or High Dynamic Range. HDR enhances the range of colors and shades that can be displayed, providing a more lifelike viewing experience. This feature is particularly valuable for applications in retail, advertising, and presentations, where engaging visuals are critical.

Another significant aspect of these Samsung models is their energy-efficient design. With AI-powered features, they can automatically adjust brightness levels based on environmental conditions, reducing power consumption without compromising image quality. This commitment to efficiency not only helps businesses reduce operational costs but also aligns with sustainability initiatives.

In terms of connectivity, these displays come equipped with HDMI, DisplayPort, and USB options for flexible integration into various systems. They also support multiple content management solutions, allowing users to easily schedule and display content from different sources.

The versatility of the Samsung LH series makes them ideal for diverse applications, from corporate environments and retail spaces to transportation hubs and public information displays. Their sleek design and minimal bezels ensure that they can be seamlessly integrated into any decor or brand aesthetic.

In summary, the Samsung LH025IFHSAS/EN, LH040IFHTDS/EN, LH015IFHTAS/EN, LH020IFHSAS/EN, and LH025IFHTAS/EN models are powerful tools equipped with cutting-edge technology, exceptional brightness, and energy efficiency, ensuring they meet the demanding needs of today’s commercial display applications.
Top Page Image Contents