Samsung PH63KPFLBF/EN, PH63KRFLBX/EN, PH50KRPLBF/EN, PH63KRFLBF/EN manual Connecting to a Camcorder

Connections

1.Connect an audio cable to the audio output port on the external device and [AV/COM- PONENT AUDIO IN[R-AUDIO-L]] port on the monitor, and connect the video output port on the external device to the [AV IN [VIDEO]] port on the monitor.

2.Play the DVD, VCR or Camcorder with a DVD disc or tape inserted.

3.Select AV using the SOURCE button on the front of the PDP display or on the remote.

Connecting to a Camcorder

1.Locate the AV output jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the [AV/COMPONENT AUDIO IN [R-AUDIO-L]] on the PDP Display .

2.Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the [AV IN [VIDEO]] on the PDP Display .

3.Select AV for the Camcorder connection using the SOURCE button on the front of the PDP Display or on the remote control.

4.Then, start the Camcorder with a tape inserted.

Note

The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables.