Samsung SP2003WWX/EN, SP2503WWX/EN, SP2203WWX/EN manual Option, Channel2

MENU		DESCRIPTION
Caption	The <Caption> function is supported when the external analog signal from the Video input contains
	subtitles.
	•	<Caption> : <Off>-<On>
	•	<Mode> : <Caption>-<Text>
	•	<Channel> : <1>-<2>
	• <Field> : <1>-<2>
		The <Caption> function will not operate in <PC> (including Component) or <HDMI> mode.
		Depending on the external signal, a change to the <Channel> or <Field> settings may be
		required.
		Each <Channel> and <Field> contains different information. <Field><2> carries additional
		information to supplement information contained in <Field><1>.
		(e.g. If English subtitles are provided on <Channel><1>, Spanish subtitles will be provided on
		<Channel><2>.)
Reset	Using this function, you can reset various settings to the factory default settings.
	• <Factory Default> : Changes the settings to the factory defaults.
	• <Reset Filter Time> : Resets the filter time.

3-5-4. Option

MENU	DESCRIPTION
Language	Using this function, you can select the language used for the menu screen.
Menu Option	• <Position> : You can move Menu Position up/down/left/right.
	• <Transparency> : You can set the translucency of the menu.
	• <High>-<Medium>-<Low>-<Opaque>
	• <Display Time> : You can set the display time of the menu.
	• <5 sec>-<10 sec>-<30 sec>-<60 sec>-<90 sec>-<120 sec>-<Stay On>
Sound	The projector comes with an internal 7W (mono) speaker. Use the settings below to tailor the sound.
	• <100Hz>-<300Hz>-<1kHz>-<3kHz>-<10kHz>
Filter Check Time	Sets the check period for the filter. (Unit: hours)
	• <Off>-<100>-<200>-<400>-<800>
	If the filter usage time is larger than the filter check period, the filter check message is
	displayed for 1 minute whenever the projector is turned on.
	Filter check message: "<Check the filter, and if necessary, clean or replace it.>".

3-5 Using