Samsung SP1055XWX/ZX, SP1005XWX/EN, SP1055XWX/EN manual Signal

Page 47

MENU

DESCRIPTION

 

 

Position

Using this function, you can adjust the screen position if it is not aligned.

 

To adjust, select the direction you want to move the screen, and then press the arrow button pointing

 

in that direction repeatedly.

 

This function does not work in <Media Play> mode.

 

 

Digital NR

If dotted lines appear in an image or the screen shakes, enabling Digital NR (Noise Reduction) can

 

improve the quality of the picture.

 

When the input signal is a PC Timing (D-Sub/HDMI) signal, <Digital NR> does not operate.

 

 

Black Level

If the black level is unsuitable for the input signal, the dark parts of an image may look unclear or dim.

 

Using this function, you can select a black level that can improve the visibility of the dark parts.

 

The <Black level> can only be set for the [AV], [S-Video], 480i and 576i in AV Timing (D-Sub),

 

and RGB signals in the [HDMI] input.

 

For [AV], [S-Video], and the 480i and 576i signals of AV Timing (D-Sub).

 

• <0 IRE> : Sets the black level to <0 IRE>.

 

• <7.5 IRE> : Sets the black level to <7.5 IRE>.

 

For the RGB signal of <HDMI> mode.

 

• <Normal> : Used in a normal environment.

 

• <Low> : Used when the dark parts of an image are too bright.

 

 

Overscan

Using this function, you can cut off the edge of a picture when unnecessary information or images

 

appear on the edge of the picture.

 

Overscan is not supported in [AV], [S-Video] and <Media Play> modes.

 

Overscan is supported only when the input signal is an AV Timing (D-Sub) or AV Timing (HDMI)

 

signal.

 

If <Overscan> is turned off, unnecessary extra parts at the edges of an image may be shown.

 

In this case, turn <Overscan> on.

 

 

Film Mode

Using this function, you can set the display mode so that it is optimized for playing movies.

 

• <Off> - <Auto>

 

• <Film Mode> is only be supported for the [AV], [S-Video], 480i, and 576i of AV Timing (D-

 

Sub) signals.

 

• This function does not work in <Media Play> mode.

 

 

PC

For PC signals, the four PC functions eliminate or reduce noise that can cause unstable screen qual-

 

ity, such as screen shaking. If the noise is not removed using Fine Adjustment, adjust the frequency

 

to the maximum and then perform Fine Adjustment again.

 

These functions are only enabled for the PC Timing (D-Sub/HDMI) input of the D-Sub terminal.

Refer to PC Timing (D-Sub/HDMI).

<Auto Adjustment> : Used to adjust the frequency and phase of PC screen automatically.

<Coarse> : Used to adjust the frequency when vertical lines appear on the PC screen.

<Fine> : Used to fine tune the PC screen.

<Reset> : Using this function, you can reset the PC menu settings to the factory default settings.

3-5

Using

Image 47
Contents Multimedia Projector Table Of Contents More Information Copyright Notice Using this ManualBefore You Start Icons used in this manualCleaning Inside the Projector Care and MaintenanceCleaning the Surface and the Lens Meaning of Signs Safety PrecautionsIcons used for safety precautions Power RelatedInstallation Related Usage Related Major Safety Precautions Page Package Contents Installation and ConnectionInstalling the Projector Leveling with Adjustable Feet Zoom and Focus Adjustment Screen Size and Projection Distance Installation and Connection Ventilation openings Rear Side PC Timing D-Sub/HDMI Supported Display ModesAV Timing Hdmi Format Resolution ScanAV Timing D-Sub NTSC, Ntsc 4.43, PAL, PAL60, PAL-N, PAL-M, Secam AV Timing VIDEO/S-VIDEOConnecting the Power Setting up the PC Environment Connecting with a PC and Setting up the PCConnecting with a PC Installation and Connection Configuring the Audio Settings for Your PC Connecting a PC using an HDMI/DVI cableConnecting a PC using an HDMI/DVI cable Installation and Connection You can select the PC speakers or projector speaker Connecting an HDMI-Compatible Device Connecting an AV device using a D-Sub cable Connecting an AV device with Component output Connecting using a Video/S-Video cable Connecting an External Monitor Connecting an External Speaker Connecting to a Static IP Network Connecting to a NetworkConnecting to a Dynamic IP Dhcp Network To use the network function, Network must be set to On Locking the product Kensington Lock slotProduct Features UsingName Description Front, UpperRemote Control DOCU. Zoom button Mode ButtonStill Button MEDIA.P ButtonSP-F10M Installing Batteries in the Remote ControlStatus LED Stand by LED IndicationsLED Indications Classifica State Measures Tion Clearing Indicator ProblemsMenu SUB-MENU Using the Screen Adjustment Menu OSD On Screen DisplayInput PictureMedia Play Signal Setup Usage Activated only in Media Play Mode Option Network Management Management using the Web BrowserProjector Management using PC Software Using Icons Status State Action High. The projector is turned off automati Using Page Using Connecting a USB Device Connecting a USB Storage Device and PrecautionsPrecautions for using a USB storage device Menu Item Description Menu displayed when you are viewing a documentDocuments Menu displayed from the Documents screenDisplay the zoom area Off On For Example Menu displayed from the Photo Thumbnails screen Play ModePhoto Aspect Ratio Slideshow SettingSlideshow RotateSet as custom logo Background MusicPlay Music MusicMenu displayed from the Music List screen Menu displayed when playing music Play Movie MovieMenu displayed from the Movie List screen Subtitle Setting Menu displayed when playing a movieTact Samsung via Email vdswmanager@samsung.com SettingsTo upgrade software Firmware UpdateUpdate/Reset Before Software UpgradeSupported Format Supported File FormatsSupported File Formats File ExtensionHtml Name File Extension FormatBefore Requesting Service Source ScreenExternal Check whether the correct network card in the PC has been NetworkFunction Media PlaySP-F10M SpecificationsModel USA only Serial Communication Protocol RS-232C Command TableCommunication Format Complies with the RS-232C Standard Control Item CMD1 CMD2 CMD3 Value Command TableControl Item CMD1 CMD2 CMD3 Value IRE/NOR Left ECO Control Item CMD1 CMD2 CMD3 Value ไทย Sound Latin America Contact Samsung WorldwideCIS Asia Pacific Africa Correct disposal of batteries in this product Europe only Correct Disposal Europe only
Related manuals
Manual 97 pages 29.54 Kb Manual 96 pages 3.64 Kb Manual 76 pages 39.85 Kb Manual 94 pages 18.62 Kb Manual 94 pages 53.64 Kb Manual 95 pages 39.65 Kb Manual 95 pages 45.21 Kb Manual 95 pages 57.42 Kb Manual 91 pages 23.27 Kb Manual 95 pages 53.33 Kb Manual 92 pages 22.21 Kb Manual 93 pages 36.54 Kb Manual 95 pages 8.92 Kb Manual 97 pages 39.61 Kb

SP1005XWX/EN, SP1055XWX/ZX, SP1055XWX/EN specifications

The Samsung SP1005XWX/EN and SP1055XWX/EN are advanced monochrome laser printers designed to meet the demanding needs of small to medium-sized businesses. These printers stand out for their robust performance, high-quality output, and user-friendly features, making them ideal for an efficient office environment.

One of the key features of the SP1005XWX/EN and SP1055XWX/EN is their impressive printing speed. The SP1005XWX/EN can print at a speed of up to 20 pages per minute, while the SP1055XWX/EN achieves an even faster output of up to 30 pages per minute. This quick performance helps to enhance productivity, allowing users to print documents swiftly without significant waiting times.

Both models are equipped with a maximum resolution of 1200 x 1200 dpi, ensuring crisp and clear text and graphic presentations. This high resolution is especially important for businesses that require high-quality printing for reports, presentations, and marketing materials. The two printers support multiple media sizes, catering to various document formats and requirements.

In terms of connectivity, the SP1005XWX/EN and SP1055XWX/EN come with versatile options including USB and network connectivity. This means they can easily integrate into existing office setups and allow for seamless printing from multiple devices. Additionally, both printers support wireless printing, making it convenient for users to print directly from smartphones, tablets, and laptops without the need for physical connections.

Energy efficiency is another hallmark of these Samsung printers. They come with Samsung's Eco Driver feature, which enables users to manage printing costs effectively by providing options such as duplex printing and toner-saving mode. This not only reduces paper waste but also contributes to lower energy consumption, benefiting the environment and the organization's budget.

The design of the SP1005XWX/EN and SP1055XWX/EN emphasizes user-friendliness. The intuitive control panel allows for easy navigation through various functions, while the compact footprint is ideal for space-constrained offices.

In summary, the Samsung SP1005XWX/EN and SP1055XWX/EN printers deliver high-speed performance, outstanding print quality, versatile connectivity options, and energy-efficient features. These characteristics make them a compelling choice for businesses looking to enhance their printing capabilities while maintaining convenience and cost-effectiveness.