Samsung SPH710AEMX/EDC manual Installation and Turning On, To Install the Projector

Page 14

Preparation

Installation and Basic Adjustments

INSTALLATION AND BASIC ADJUSTMENTS

Installation and Turning On

To Install the Projector

Install the projector so that the projection is perpendicular to the screen.

 

■

Center the lens to the screen. If the projector

 

 

is not positioned perpendicular to the

NOTE

screen, the image may appear trapezoidal.

 

 

 

■

Do not install the screen in a bright place as

 

 

it makes it harder to see the screen.

■Darken the room when installing the projector in a bright place.

Installing Projector on Backside of Screen

Install a translucent screen to place the projector on the backside of the screen. The Translucent will show the horizontally flipped image. Rotate the image (projected from the projector) horizontally.

(Page 44)

Installing Projector in Front of the Screen

Install the projector at the viewers’ side.

■ The projector may be installed on the ceiling

NOTE

in front / back side of the screen.

■When installing the projector on the ceiling, contact your dealer.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Owners Instructions SP-H700/H710/H500 Table of Contents Table of Contents Menu OptionFeatures and Design Projector Lamp Page Preparation Accessories Front/Upper SideIndicator Information Projector and AccessoriesCables Rear Side and CablesRear Side Remote Control Buttons KeystoneOperating Move/Select Button Operating the Remote ControlInserting Batteries into Remote Control Using Remote Control in Dark Place Light Installing Projector on Backside of Screen Installation and Turning OnTo Install the Projector Installing Projector in Front of the ScreenTurning On Projector Zoom and Focus Adjustment Using the Zoom Knob and the Focus RingLeveling with Adjustable Feet Using Adjustable FeetUsing the Lens Shift Dial Using the Lens Shift DialScreen Size and Projection Distance Screen Size and Projection Distance Connections and Source Setup Check the following Before Connecting Before ConnectionsConnecting to VCR/Camcorder/Cable Box Viewing the pictureConnecting to DVD Press the COMP.2 button to selectConnecting to the Digital TV Receiver Connecting to Video EquipmentSetting up the External Input Source Setting up the External Input SourceNaming the External Connections Naming the External ConnectionsPicture Adjustment Picture Adjustment Selecting and Adjusting ColorSelecting Picture Mode Selecting Picture ModeCustom Picture Menu Custom Settings of the PictureCustom Settings of the Picture Color Standard Changing the Color StandardChanging the Color Standard Selecting and Adjusting Color Temperature Color Temperature MenuGamma Correction Gamma CorrectionSaving Custom Picture Settings SettingsDNIe Mode Setting up DNIeSetting up DNIe Selecting Picture Size Selecting Picture SizePicture Adjustment Selecting Picture Size Supported Picture SizesScreen Position Adjustment Screen Position AdjustmentFilm Mode Film ModeOverscan OverscanStill Picture Setup Install Menu Flipping/Reversing the Projected ImageLight Setting Mode Light SettingLight Setting Correcting Vertical Keystone Correcting V-KeystoneTest Pattern Menu Test PatternsTest Patterns Restoring the Factory Default Settings Default SettingsInformation InformationPage Menu Option Setting the Language Setting the LanguageSetting the Menu Position Setting the Menu PositionSetting the Menu Translucency Setting the Menu TranslucencySetting Up the Menu Display Time Setting Up the Menu Display TimeSelecting the Quick Menu Selecting the Quick MenuConnecting to PC Before Connecting to PC Display modes supported by this projectorSetting up the PC Environment Setting up the PC EnvironmentViewing the PC Screen Connecting to PCUsing PC Video Cable or DVI Cable Vesa Plug & Play Pin Configuration of PC Video Port Plug PC Video CablePin signal Automatic Picture Adjustment Automatic Picture AdjustmentFrequency Adjustment Frequency AdjustmentFine Tuning with the Phase Adjustment Fine Tuning with the Phase AdjustmentZooming the Screen Zooming the ScreenReset the PC Reset the PCTroubleshooting Installation and Connection Menu and Remote ControlBefore Contacting Service Personnel Screen and External SourcePage Other Information Cleaning the Inside of the Projector Storage and MaintenanceCleaning the Projector and Lens Storage and MaintenancePurchasing Optional Parts Purchasing Optional PartsOptional Parts Buttons used for Screen Menu Select Composite/S-Video/Component Input ModeStructure of Screen Menu Structure of Screen MenuSetup Install Structure of Screen Menu Lamp Replacement Lamp Replacement ProcedureControl Connecting the Projector to a PCTransmission Sequence and Data Format Commands RS-232C Connection and ControlSpecifications SpecificationsRemote Control Specifications Remote Control SpecificationsMemo Memo Europe Only
Related manuals
Manual 84 pages 36.32 Kb Manual 80 pages 35.91 Kb Manual 84 pages 18.2 Kb Manual 84 pages 31.92 Kb Manual 84 pages 62.53 Kb Manual 80 pages 57 Kb Manual 84 pages 24.4 Kb Manual 80 pages 60.61 Kb Manual 80 pages 6.64 Kb Manual 80 pages 50.38 Kb
Top Page Image Contents