Samsung SPL250WX/EN LED Indications, Lamp TEMPInformation, Clearing Indicator Problems, Measures

Page 10

Power Cable

Remote Control/ 1 Batteries (CR2025)

Cleaning Cloth

(Not available in all locations)

 

 

D-Sub Cable

LED Indications

:Light is On

:Light is Blinking

:Light is Off

STAND

BY

LAMP TEMPInformation

If you press the POWER button on the remote control or projector, the screen appears within 30 seconds.

The projector is in normal operating condition.

This state appears when the projector is preparing an operation after the POWER button on the projector or the remote control has been pressed.

The POWER button is pressed to turn off the projector, and the cooling system is in operation to cool off the inside of the projector. (Operates for about 30 seconds.)

Refer to Action 1 below if the cooling fan inside the projector is not in normal operation condition.

Refer to Action 2 below if the lamp cover protecting the lamp unit is not closed properly.

This indicates that the lens cover does not open completely. Refer to Action 3 below.

This indicates that it has changed to Cooling mode, because the internal temperature of the projector has increased beyond the maintenance limit.

Refer to Action 4 below.

This indicates that the power is turned off automatically because the internal temperature of the projector has increased beyond the maintenance limit. Refer to Action 5 below

A problem has occurred with the operation of the lamp. Refer to Action 6.

Clearing Indicator Problems

Classification State

When the cooling fan

Action 1 system is not in normal operating condition.

When the lamp cover protecting the lamp unit is

Action 2 not properly closed or the sensor system is not in normal operating condition.

The status that the lens

Action 3 cover is not open completely.

This indicates that it has changed

Measures

If the symptom remains even after disconnecting and then reconnecting the power cord and turning the projector on again, contact your product provider or our service center.

Check if the screws on the side of the projector are correctly locked, and if they are locked normally, contact your product distributor or a service center.

Open the lens cover completely.

If the lens cover is not open completely while operating the projector, both the video and audio are turned off automatically.

If this status persists for ten minutes, the projector is turned off automatically.

If the internal temperature of the projector has increased beyond the maintenance limit, it is changed to Cooling mode before it is turned off automatically.

Image 10
Contents Page Under no circumstances touch the power plug with wet hands Insert the power plug firmly so that it does not come looseDo not use loose power outlets or damaged power cables Do not plug multiple devices into a single wall outletKeep the power cord away from heaters Unplug the power plug before cleaning the productOperable Keep the product out of children’s reach Place the product on the ground carefullyDo not drop the product while carrying it Do not disassemble, or attempt to fix or modify the productThere is a danger of fire or explosion Make sure to place your remote control on a table or desk Correct disposal of batteries in this product Europe onlyPage An optical engine adopting new LCD technology Front/Upper SideLens cover UnpackingLamp TEMPInformation Clearing Indicator ProblemsLED Indications Classification StateRemote Control Signal Receiver Menu PowerMove Exit MuteReturn VOLIBM AV Timing D-Sub Format Resolution Scan AV Timing VIDEO/S-VIDEOSelect Menu Setup Install Front-Floor Installing the ProjectorSelect Menu Setup Install Rear-Floor Zoom and Focus AdjustmentScreen Size and Projection Distance Leveling with Adjustable FeetZmm Ymm Screen Resolution/Size Modes table Connecting a PC using a D-Sub cableConnecting an External Monitor Connecting an AV device using a D-Sub cable Connecting an AV device with component outputConnecting using a Video/S-Video cable Connecting an External SpeakerPage Turning off the projector Turning on the projectorSelecting an input source Screen Adjustment Screen Description Play/Stop AdjustmentDescription Play/Stop Timing signal Color Temperature Offset GainAuto Adjustment Coarse Fine Reset Logo Blue Black ResetUsage Color PC menu Sharpness,Tint Zoom Low Medium High Opaque Language Menu OptionTransparency SoundOff 10 min 20 min 30 min Menu and Remote Control Installation and ConnectionSymptoms Troubleshooting Screen and External SourceDefaultfrom the menu To clean the interior of the projector To clean the exterior and lens of the projectorClean the projector using a soft, dry cloth Lamp ReplacementReplacing and Cleaning the Filter Lamp Replacement ProcedurePrecautions when replacing the projector filter North America Ventilating openingsLocation of the ventilation openings Latin AmericaEurope CISAsia Pacific Middle East & Africa
Related manuals
Manual 38 pages 6.51 Kb Manual 37 pages 7.32 Kb Manual 38 pages 16.74 Kb Manual 39 pages 56.41 Kb Manual 37 pages 16.22 Kb Manual 2 pages 53.6 Kb Manual 37 pages 39.11 Kb Manual 37 pages 41.2 Kb Manual 37 pages 35.26 Kb Manual 39 pages 44.39 Kb Manual 33 pages 14.59 Kb Manual 37 pages 25.3 Kb Manual 36 pages 2.13 Kb

SPL250WX/EN, SPL220WVX/EN, SPL250WVX/XT, SPL250WVX/ZN, SPL250WX/ZN specifications

Samsung has established itself as a powerhouse in the home appliance domain, and its SPL200WX/EN and SPL250WX/EN air purifiers epitomize this innovation with cutting-edge technology and user-centric features. These models are designed to create a healthier indoor environment, combining efficiency with advanced functionality.

The SPL200WX/EN and SPL250WX/EN models both boast Samsung's advanced filtration system, which includes a pre-filter, activated carbon filter, and a HEPA filter. The pre-filter captures larger dust particles and pet hair, extending the lifespan of the subsequent filters. The activated carbon layer is effective in neutralizing odors and capturing harmful gases, while the HEPA filter traps 99.97% of fine particulate matter, down to 0.3 microns in size. This multi-layer filtration system ensures that the air in your home is not just filtered, but thoroughly purified.

One of the standout features of these air purifiers is their real-time air quality monitoring. Equipped with advanced sensors, both models automatically detect the levels of particulate matter and gases in the air. This real-time data allows the air purifiers to adjust their fan speeds accordingly, providing efficient air purification as needed. The air quality indicator light gives users immediate feedback, changing colors to reflect air quality levels, which adds a layer of convenience.

The SPL250WX/EN takes it a step further with Smart Wi-Fi capabilities, enabling users to control the device remotely through a smartphone app. This feature is particularly beneficial for individuals who lead busy lives, allowing them to monitor air quality and adjustments from anywhere. Furthermore, voice control compatibility with virtual assistants enhances user experience by providing hands-free operation.

Both models are designed with a sleek and modern aesthetic, seamlessly fitting into any home décor. Their compact size and quiet operation make them suitable for various spaces, from living rooms to bedrooms. Energy efficiency is another critical aspect, as both air purifiers are designed to operate with minimal energy consumption, earning recognition for their eco-friendly features.

In summary, the Samsung SPL200WX/EN and SPL250WX/EN air purifiers stand out for their advanced filtration technology, real-time monitoring, Wi-Fi capabilities, and energy efficiency, making them excellent investments for anyone looking to improve their indoor air quality. Whether combating allergens, odors, or simply maintaining a fresh environment, these air purifiers deliver a comprehensive solution, embodying Samsung’s commitment to innovative home technology.