Samsung LH32DMDPLGC/UE, LH40DMDPLGC/EN, LH32DMDPLGC/EN manual Manual Network Setup Wireless

6 When done, use the right arrow button to move the cursor to Done, and then press E. The network connection screen appears and the verification process starts.

――A connection with the router is established, but the Internet cannot be accessed.

7 When the connection has been verified, the “Your wireless network and Internet connection are setup and ready to use.” message appears.

Manual Network Setup (Wireless)

Offices may use static IP addresses.

If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server address. Enter these values manually.

Getting the Network Connection Values

To view the Network connection values on most Windows computers, follow these steps.

1	Right click the Network icon on the bottom right of the screen.
2	In the pop-up menu that appears, click Status.
3	On the dialog that appears, click the Support tab.
4	On the Support Tab, click the Details button. The Network connection values are displayed.

How to set up manually

1	Set Network Type to Wireless from the Network Settings page.
2	The Network function searches for available wireless networks. When done, it displays a list of the
	available networks.
3	In the list of networks, press the u or d button to select a network, and then press the E button
	twice.
	――If the desired wireless router does not appear, select Refresh to search again.
	――If the router cannot be found after retrying, select the Stop button.
	The Add Network button appears.
	Select Add Network to add a wireless router to connect to.
4	If the Enter password. screen appears, go to step 5. If you select a wireless router that does not
	have security, go to step 7.
5	If the router has security, enter the Enter password. (Security key or PIN).
6	When done, use the right arrow button to move the cursor to Done, and then press E. The
	network connection screen appears and the verification process starts.
7	Select Stop while network connections are being attempted. This will stop the connection.
8	Select IP Settings on network connection screen. The IP Settings screen appears.
9	Select the field at the top, press E, and then set IP Settings to Enter manually. Repeat the entry
	process for each field in the IP Address.

――Setting IP Settings to Enter manually automatically changes DNS Setting to Enter manually.