Radio Shack HTX-200 owner manual Understanding Repeaters

Page 26

UNDERSTANDING REPEATERS

Operation through a repeater, where you transmit on one fre- quency and receive on another, is called duplex operation. Oper- ation direct to another station, where you transmit and receive on the same frequency, is called simplex operation.

A repeater is a station that receives a signal on one frequency (the input frequency) and then retransmits that signal on a differ- ent frequency (the output frequency). Repeater antennas are typ- ically located at the tops of tall buildings or on antenna towers, so a relatively low-power signal can reach the repeater. The repeat- er retransmits the signal at a higher power. This gives your trans- ceiver the ability to communicate over a much greater range.

To use a repeater, you must know the repeater’s input and output frequencies. Repeaters are usually identified by their output fre- quency. Thus, a repeater that has an output frequency of 146.94 is referred to as “the 146.942 repeater.” To determine the input frequency, you must know the frequency offset (typically 600 kHz for the 2-meter band) and the offset direction (+ if you add 600 kHz to the output, or – if you subtract 600 kHz from the output).

Whether the offset is positive or negative depends on:

•which part of the band the repeater operates on

•local convention

•proximity of repeaters using the same two frequencies

To determine the offset and the direction, obtain a copy of The ARRL Repeater Handbook (available from your local Ra- dioShack store or directly from the ARRL) which lists the loca- tions of repeaters as well as their frequency and offset information.

A + above the displayed frequency indicates a positive offset, while a – above the frequency indicates a negative offset. If nei- ther + nor – appears, the HTX-200 is set for simplex operation.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents HTX-200 Features Ctcss Manual Conventions FCC InformationContents Continuous Tone Coded Squelch System Features Introduction to Amateur Radio Page Power Sources PreparationTesting Internal Batteries Using AC Power Using NI-CD or NI-MH Battery PowerUsing Vehicle Battery Power Connecting the Antenna Attaching the Belt ClipConnecting a MICROPHONE/ Speaker Attaching the Wrist StrapPTT Using the Menus Using the HTX-200’S MenusTot Tone Set Setting Option = default setting Description Quick Look AT the Controls VOL/OFFMO REV VOL, and SQ Quick Look AT the Display Held down at the same timeTurning on the HTX-200 Selecting Frequencies Direct TuningOperation Receiving Transmissions Temporarily Opening SquelchTransmitting Understanding Repeaters Setting the Repeater Offset Frequency Turning Duplex Operation on and OFFSetting the Repeater Offset Direction Reversing the Transmit and Receive FrequenciesMemory Operation Storing a TRANSMIT/RECEIVE FrequencyRecalling Memories Clearing a Single MemoryUsing the CALLING-FREQUENCY Memory Scanning Standard Memory Locations Scanning OperationScanning for Active Frequencies Setting a Memory Location to Always Skip During Scanning Page Continuous Tone Coded Squelch System Features Subaudible Tone Frequencies Hz Tone Paging Sending Paging TonesLocking the Keypad Other Special FeaturesChanging the Transmit Frequency Range Lighting the DisplayTurning the KEY Tone on and OFF Checking the Current Memory SettingsSetting the Frequency Step Power Save TIME-OUT TimerReducing Squelch Tail Busy Channel LockoutTroubleshooting You see Possible Cause RemediesCare and Maintenance Using the Keypad Diagnostic Resetting the HTX-200Specifications GeneralPage Page Limited One-Year Warranty

HTX-200 specifications

The Radio Shack HTX-200 is a compact, versatile dual-band handheld transceiver that made waves in the amateur radio community during the 1990s. Known for its rugged design and user-friendly interface, the HTX-200 offered radio enthusiasts a gateway into the world of VHF and UHF communications. Packed with a range of features, it quickly became a popular choice among amateur radio operators.

One of the standout characteristics of the HTX-200 is its dual-band capability, allowing users to transmit and receive on both 2-meter (144-148 MHz) and 70-centimeter (440-450 MHz) bands. This versatility enables operators to communicate in diverse environments, whether participating in local nets, emergency communications, or casual conversations. The radio's compact size makes it portable, making it convenient for both casual use and emergency preparedness.

The HTX-200 features 40 built-in memory channels, providing ample storage for favorite frequencies. Users can easily program these channels for quick access during operation. Additionally, the radio supports CTCSS (Continuous Tone-Coded Squelch System), which enhances communication privacy by requiring a specific sub-audible tone for access to certain channels. This is especially useful in crowded bands, where many operators might be sharing the same frequency.

In terms of power output, the HTX-200 delivers 5 watts, which is sufficient for effective communication over considerable distances, particularly when combined with a good antenna setup. The radio also incorporates a built-in battery saver feature, extending the life of the rechargeable batteries during prolonged use.

Another notable feature is its easy-to-read LCD display, which provides essential information, such as the operating frequency, battery level, and mode of operation. The intuitive control layout allows operators to quickly navigate settings without getting bogged down in complicated menus.

Durability is another key characteristic of the HTX-200. Its sturdy construction makes it reliable for outdoor use and field operations. Furthermore, the availability of various accessories, such as microphones, headsets, and antennas, enhances its functionality, allowing users to customize their experience based on specific needs.

Overall, the Radio Shack HTX-200 remains an iconic model in the amateur radio landscape, renowned for its performance, reliability, and ease of use. For both novice and experienced operators, it served as a dependable tool to explore the exciting world of radio communications.
Top Page Image Contents