Samsung LF18TUSLBM/EN, LF18TUSLB3/EN, LF18TUSLBL/EN manual Troubleshooting, Monitor Self-Diagnosis

5 Troubleshooting

5-1 Monitor Self-Diagnosis

• You can check if the product is working properly using the Self-Diagnosis function.

•If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform the self-diagnosis function according to the procedures below.

1.Turn the product and the PC off.

2.Separate the signal cable from the product.

3.Turn the product on.

4.If the product is working properly, the <Check Signal Cable> message appears.

In this case, if a blank screen is displayed again, make sure that there is no problem with the PC and the connection. The product is working properly.

Troubleshooting 5-1