Samsung LF00FNXPFBZXCI, LF-NXN2N/EN manual  Secondary DNS Server,  Domain Name,  Ethernet Mode

Page 34

2Using "PCoIP"

Secondary DNS Server

The secondary DNS IP address of the device. This field is optional.

If the DNS server IP address is configured using the Connection Manager, the address may be set as an FQDN instead of an IP address.

Domain Name

The domain name used (e.g., 'domain.local'). This field is optional. This field specifies the host or domain of the client.

FQDN

The Fully Qualified Domain Name for the host or client. The default value is pcoip-host-<MAC> or pcoipportal-<MAC> where <MAC> is the MAC address of the host or client.

The domain name is appended if used (e.g., pcoip-host-<MAC>.domain.local). This field is read-only on this page.

Ethernet Mode

Lets you configure the Ethernet mode of the host or client as:

Auto

100 Mbps Full-Duplex

10 Mbps Full-Duplex

When you choose 10 Mbps Full-Duplexor 100 Mbps Full-Duplexand then click Apply, a warning message will appear.

"Warning: When Auto-Negotiation is disabled on the PCoIP device, it must also be disabled on the switch. Additionally, the PCoIP device and switch must be configured to use the same speed and duplex parameters. Different parameters may result in a loss of network connectivity.

Are you sure you want to continue?" Click OK to change the parameter.

You should always set the Ethernet Mode to Auto and only use 10 Mbps Full-Duplexor

100 Mbps Full-duplexwhen the other network equipment (i.e., switch) is also configured to operate at 10 Mbps Full-Duplexor 100 Mbps Full-duplex. An improperly configured Ethernet Mode may result in the network operating at half-duplex which is not supported by the PCoIP protocol. The session will be severely degraded and eventually dropped.

Enable 802.1X Security: If the connected network supports 802.1x, Enable 802.1X Security should be enabled and security-authenticated devices can only be used.

If Enable 802.1X Security is enabled, configure the Authentication, Identity and Client Certificate settings.

TLS (Transport Layer Security) is only supported as an authentication protocol at present.

Identity: Enter the product ID that will be used on the network.

Client Certificate: Select a certificate uploaded from the Certificate Upload page.

2 Using "PCoIP" 34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents NX-N2 Table Of Contents Index Before Using the Product CopyrightSymbols for safety precautions Icons used in this manualSecuring the Installation Space Precautions for storageSafety Precautions Electricity and SafetyInstallation and Safety Before Using the Product Operation and Safety Before Using the Product Before Using the Product Before Using the Product Checking the Components Checking the ComponentsComponents Items sold separately Parts Front viewConnect to a USB device Speaker Reverse Side Attaching the cradle InstallationVertical Type Horizontal Type Attaching Products Anti-theft Lock Using PCoIP What is a PC over IP?Connection Using the DP Cable Connection to Use PCoIPConnecting to a Secondary Monitor Connecting to Headphones Connecting a MicrophoneLAN Connection Connecting USB Devices Connecting the Power Connect to the host PC using a LAN cable Connect Screen PCoIPOn Screen Display OSD Connect Button User Settings  Configuration Diagnostics OSD Options MenuNetwork Label Language Access IPv6 Discovery Power Audio Configuration WindowSession Display Reset Network Tab  Domain Name  Ethernet Mode Secondary DNS Server  Auto  100 Mbps Full-Duplex  10 Mbps Full-DuplexIPv6 Tab Enable Slaac Manual AddressPCoIP Device Description Label TabPCoIP Device Name Generic Tag Enable Discovery Discovery TabSession Tab  Connection TypeConnection Type Configuration  AdvancedLanguage Tab Keyboard LayoutPower Tab  Enable Attached Display Override Display TabEnable Display Cloning Audio Tab  Enable Local USB Audio DriverEnable Local USB Device Type Audio DriverReset Tab  Reset Parameters Event Log  Session Statistics  PCoIP Processor  Ping Diagnostics WindowEvent Log Tab  View event log messagesSession Statistics Tab 17 PCoIP Processor Configuration PCoIP Processor TabPing Tab Information Window  Bootloader Build Date  Bootloader Version Bootloader Build ID  Firmware Build DateUser Settings Window Certificate TabMouse Tab  Mouse SpeedKeyboard Repeat Delay Keyboard TabImage Tab  Image Quality PreferenceDisplay Topology Tab Options User Settings interface Enable Configuration  Display Layout Primary  Resolution Alignment  PositionTouch Screen Tab  Enable right click on hold Right click delay  Touch screen calibrationPassword Window Old PasswordUsing PCoIP Wake On LAN Wake on USB OSD Logo Upload Firmwre Update Sound issue Installation issueCheck the following Specifications GeneralPower consumption Appendix Contact Samsung World WideEurope CIS Africa Ghana Product damage caused by customers fault Responsibility for the Pay Service Cost to CustomersNot a product defect Others Correct Disposal Correct disposal of batteries in this productIndex
Related manuals
Manual 1 pages 1.56 Kb Manual 6 pages 7.85 Kb Manual 2 pages 28.95 Kb Manual 2 pages 7.82 Kb Manual 81 pages 50.74 Kb Manual 76 pages 42.44 Kb Manual 78 pages 11.88 Kb Manual 76 pages 34.38 Kb Manual 81 pages 54.86 Kb Manual 80 pages 32.92 Kb Manual 76 pages 56.01 Kb Manual 77 pages 32.42 Kb Manual 77 pages 35.24 Kb Manual 79 pages 32.59 Kb Manual 80 pages 6.39 Kb Manual 77 pages 7.85 Kb Manual 79 pages 18.4 Kb Manual 76 pages 33.02 Kb

LF00FNXPFBZXCI, LF00FNXPFBZXXV, LF-NXN2N/XY, LF-NXN2N/EN, LF00FNXPFBZXEN specifications

The Samsung LF00FNXPFBZXEN is an innovative display solution designed for a range of uses, blending cutting-edge technology with practicality. This model is part of Samsung's impressive line-up of large-format displays, engineered to meet the demands of modern visual communication in various environments such as retail, conference rooms, and public spaces.

One of the main features of the LF00FNXPFBZXEN is its stunning visual performance. The screen boasts a high-resolution display that provides crisp images and vibrant colors, ensuring that content is presented clearly and attractively. This model supports 4K resolution, allowing for high-definition content that captures the attention of viewers and enhances the overall experience.

The LF00FNXPFBZXEN utilizes advanced LED technology, which offers numerous advantages over traditional display options. LED displays are known for their exceptional brightness and contrast ratios, making them suitable for various lighting conditions, from dimly lit rooms to brightly illuminated environments. The enhanced color accuracy and uniformity of LED technology allow for consistent and engaging visual presentations.

Another noteworthy characteristic of this display is its durability and reliability. Samsung has engineered the LF00FNXPFBZXEN to withstand heavy use, making it ideal for commercial applications. Its robust design is resistant to wear and tear, ensuring longevity and reduced maintenance costs over time. Moreover, the display is built to operate continuously, capable of running 24/7 without compromising performance.

In terms of connectivity, the LF00FNXPFBZXEN comes equipped with multiple input options, allowing for seamless integration with various devices. Users have the flexibility to connect laptops, media players, and other hardware, facilitating versatile content presentation and sharing capabilities. The inclusion of advanced processing technologies also ensures smooth playback of multimedia content.

The LF00FNXPFBZXEN is designed with user-friendliness in mind. It features an easy-to-navigate interface that simplifies content management and display adjustments. This allows users to efficiently operate the display, whether for presentations or signage applications.

In summary, the Samsung LF00FNXPFBZXEN is a top-tier display solution that combines high-resolution visuals, sturdy construction, and user-friendly features. Its integration of advanced LED technology and multiple connectivity options makes it an excellent choice for any business looking to enhance its visual communication strategy.
Top Page Image Contents