4Connecting IEEE1394 Device
●Connect the IEEE1394 hard disk through the back port of
●You can connect up to 6 IEEE1394 armored hard disks by the
●After connection, Menu - System - HDD Setup is necessary for recognition and setup for use.
Caution
The IEEE1394 Device hard disk shall be set to Master.
●It acts as HOT PLUG to connect or disconnect the IEEE1394 device while the sys- tem is running.
●If you press Connect/Disconnect in Menu - System - HDD Setup, HOT PLUG will be recognized or deleted.
Note
See 5-8 System (HDD Setup) of User’s Manual.
Caution
- Wait until the HOT PLUG connected hard disk is stabilized enough (approx. 2 sec- onds per each hard disk) and click CONNECT in
-Be sure to click DISCONNECT in