Motion Detecting
●M.D State
Off : Motion Detection does not operate
On : Motion Detection starts operation.
●Area
Select the Motion Detection zone. It is composed of 45x48 sized Block. You are forbidden to determine 4 block rows(Up/Down/Left/Right) to allow them to be displayed in all monitors.
❿Select All : Selects the whole area.
❿Select One : Selects a block every time. Selection is done by a toggle system.
❿Select Quarter : Split the whole area into 4 pieces, which enables selecting a fourth of the whole area.
❿Clear All : Cancels the whole area.
❿Save & Exit : Saves and exits.
❿Exit : Exits without saving.