Before we start

This User’s Manual describes the basic usage of SHR-2040/2041/2042. This Manual contains all the matters necessary for using SHR-2040/2041/2042 such as brief instruction, part name, function, connecting other equipment, and menu setup of SHR-2040/2041/2042.

-SEC retains the copyright on this User’s Manual.

-This User’s Manual cannot be copied without SEC’s prior written approval.

-We are not liable for any or all losses to the product incurred by your use of non- standard product or violation of User’s Manual.

-If you want to open the system case to touch the inside, please consult with an expert who works for the shop where you bought the product.

-You may download open source codes from the following website. (See CCTV Part of http://www.sec.co.kr)

WARNING

[Battery]

As wrong exchange of the battery in SHR-2040/2041/2042 may cause explosion, you shall use the certified battery for SHR-2040/2041/2042.

The battery specification is as follows.

-Normal Voltage: 3V

-Normal Capacity: 220mAh

-Continuous Standard Load: 0.2mA

-Operating Temperature: -30 ~ +60˚C

[System Shutdown]

-Power-off without terminating the system in the System Shutdown menu may incur improper motion like data loss and disk failure. Power-off shall be done in the System Shutdown menu.

[Operation warranty temperature]

-Operation warranty temperature of this device is 0 ~ 45°…. If the device is left under the warranty temperature for a long time, it cannot be operated. When using the device after leaving for a long time in the low temperature, please use it after keeping in the normal temperature for a few times. Especially the warranty temper- ature of the embedded HDD is 5 ~ 55°…, therefore it cannot be operated in the low temperature.

Standards Approvals

Note : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance whit the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

iii