Samsung SMO-210TP manual Alarm, Motion, Loss and Door Bell, Alarm Occurrence

1_SMO-210TP_ENG 5/30/03 2:56 PM Page e-42

e-42

Chapter 7: Alarm, Motion, Loss and Door Bell

1. Alarm Occurrence

The Alarm becomes available only when an Alarm Box is connected.

1)When an Alarm trigger is received, a warning buzzer sounds and the screen is divided into 9 Live-Mode sub-screens. The word “EVENT” appears on the screen and the Alarm occurrence information is displayed at the right bottom of the screen.

	02/06/01	12:30:01
					EVENT
CH1	CH2	CH3
CH4	CH5	CH6
CH7	CH8	A		2345678
			1

2)Press ENTER (in the middle of the Rotary Wheel) to replay the event in Event Replay mode. Up to 15 screens can be replayed centering on the time of the Alarm. The duration of Replay is displayed in a graph.

Turn the Rotary Wheel during the Replay to forward or reverse the stored screens one by one.

Press ENTER to terminate the Event Replay. The Event Replay will continue until ENTER has been pressed.

	02/06/01		12:30:01
					EVENT
CH1	1	CH2		CH3
CH4		CH5		CH6
				ALARM
			02/06/01
CH7		CH8	12:29:30

3)Alarm occurrence information is stored in the “EVENT LIST”.

4)Alarm Out (HOT, COLD) signals are active during the “ALARM HOLD TIME. ”

•ALARM HOLD TIME : Time during which the Alarm function is carried on after the Alarm is first detected. Alarm Hold Time is reset automatically when Event Replay is turned on.