Samsung HW-M360/EN manual SPORTS, or Movie, DRC Dynamic Range Control, BT Pairing mode Source

	SOUND	You can select the desired sound effect by choosing STANDARD, MUSIC, CLEAR VOICE,
	MODE	SPORTS, or MOVIE.
	SOUND MODE	Select the “STANDARD” mode if you want to enjoy the original sound.
		•• DRC (Dynamic Range Control)
		Lets you apply dynamic range control to Dolby Digital tracks. If you press and hold the
		SOUND MODE button while in standby mode, DRC (Dynamic Range Control) turns on
		or off. With the DRC turned on, loud sound is reduced. (The sound may be distorted.)

Press to select a source connected to the Soundbar.

••	BT PAIRING mode
Source	To turn on “BT PAIRING” mode in “BT” mode, press and hold the	(Source) button
	for more than 5 seconds. See page 15 for details.
••	Auto Power Down Function
	The unit turns off automatically in the following situations.

––D.IN / BT / USB Mode : If there is no audio signal for 5 minutes.

––AUX Mode :

––If the Audio (AUX) Cable is disconnected for 5 minutes.

––If there is no KEY input for 8 hours when the Audio (AUX) Cable is connected. (Auto Power Down function can be turned off only in that case.)

––To turn off Auto Power Down function, while in “AUX” mode, press and hold the pbutton for 5 seconds. “ON-AUTO POWER DOWN” / “OFF-AUTO POWER DOWN” appears on the display.

Press the pbutton to pause a music file temporarily.

If you press the button again, the music file plays.

Play / Pause

ENG - 20